Re: [j-nsp] Juniper BFD session with Huawei

Hi Krzysztof, I am using MX router with version 15.1F6-S5.6 and the options you referred are not existing in the software :( [edit protocols mpls label-switched-path Juniper-Huawei] Juniper# set oam bfd-liveness-detection ? Possible completions: + apply-groups Groups from which to inherit

Re: [j-nsp] Juniper BFD session with Huawei

Hi, Please check following knobs: no-router-alert-option use-ip-ttl-1 bfd-port root@PE1# set protocols mpls label-switched-path PE1-->PE4 primary PATH-1 oam bfd-liveness-detection ? W21: Sat 2017-05-27T10:12:07 PDT (UTC-0700) Possible completions: + apply-groups Groups from which to inh

Re: [j-nsp] Juniper BFD session with Huawei

Hi Steinar, Thanks for reply. Actually, i have been looking for BFD at MPLS LSP level instead of ISIS level. Are you using BFD at LSP level between Juniper and Huawei? Kind regards, Gokhan On Fri, May 26, 2017 at 2:39 PM, wrote: > > I am trying to establish a RSVP-OAM between a Juniper and Hua

Re: [j-nsp] Juniper BFD session with Huawei

> I am trying to establish a RSVP-OAM between a Juniper and Huawei device. Possibly not directly relevant to your case - but we have lots of BFD sessions for IS-IS between Juniper and Huawei. Nothing special, it just works. Lightly edited example below. Steinar Haug, Nethelp consulting, sth...@ne

[j-nsp] Juniper BFD session with Huawei

Dear group, I am trying to establish a RSVP-OAM between a Juniper and Huawei device. set protocols mpls label-switched-path Juniper-Huawei oam bfd-liveness-detection minimum-interval 100 set protocols mpls label-switched-path Juniper-Huawei oam bfd-liveness-detection multiplier 3 set protocol