@puck.nether.net
Subject: Re: [j-nsp] Juniper MX240 to Alcatel SAS-M epipe
On Wed, Aug 07, 2013 at 09:01:46AM -0500, Eduardo Barrios wrote:
> Tom,
>
> We have a couple of VPLS instances b/t a Juniper M10i and an Alcatel7705. The
> difference seems to be 14. Unfortunately Alcatel does
On Wed, Aug 07, 2013 at 09:01:46AM -0500, Eduardo Barrios wrote:
> Tom,
>
> We have a couple of VPLS instances b/t a Juniper M10i and an Alcatel7705. The
> difference seems to be 14. Unfortunately Alcatel does not have an
> "ignore-mtu-mismatch" switch.
>
>From TiMOS 4.X on 7210 SASM and 9.X o
On (2013-08-08 23:07 +0200), Tomasz Mikołajek wrote:
> OK, I ping OLT from MX like you Saku wrote and i get information:
So you have CEi -- PEi -- MPLS -- PEe -- CEe
And you're pinging from CEi to CEe and only 1500B does not work, what is
largest size which does work?
But clearly if 1500B does n
OK, I ping OLT from MX like you Saku wrote and i get information:
With JunOS, the size you specify on the ping command is actually the size
of the ICMP payload. 1472 of payload + 8 bytes of ICMP header + 20 bytes
of IP header results in a 1500 bytes IP packet, which is the largest packet
you can
On (2013-08-07 17:43 +0200), Mark Tinka wrote:
> True, but the OP suggested that some of the web sites he's
> browsing don't load correctly, which could allude to an MTU
> issue in the data plane.
Mea culpa, luckily point remains it does not matter what the eline MTU is.
Fully agreed on your s
On Wednesday, August 07, 2013 04:22:26 PM Eduardo Barrios
wrote:
> It's a mixture of Alcatel and Juniper, we always use the
> lowest MTU 2102 (this is the MAX MTU on a 7705). Our
> M10s do 9192. Even though we might have a primary path
> that was discovered @ 9192 we still have to take into
> ac
On Wednesday, August 07, 2013 04:24:04 PM Saku Ytti wrote:
> MTU in martini is carried in LDP and in kompella in BGP
> NLRI as extended community.
> In both case it has no effect to actual forwarding nor is
> it enforced by padding signaling.
> In JunOS martini/l2circuit you can configure arbitrar
uardo
-Original Message-
From: Mark Tinka [mailto:mark.ti...@seacom.mu]
Sent: Wednesday, August 07, 2013 9:14 AM
To: juniper-nsp@puck.nether.net
Cc: Eduardo Barrios; Tomasz Mikołajek
Subject: Re: [j-nsp] Juniper MX240 to Alcatel SAS-M epipe
On Wednesday, August 07, 2013 04:01:46 PM Eduardo Ba
On (2013-08-07 11:06 +0200), Tomasz Mikołajek wrote:
> Internet but not every webpage work. I think the problem is in MTU in
> epipe. Alcatel has MTU 1522. How to calculate MTU size for MX? Thanks for
> help in advance.
MTU in martini is carried in LDP and in kompella in BGP NLRI as extended
comm
On Wednesday, August 07, 2013 04:01:46 PM Eduardo Barrios
wrote:
> We have a couple of VPLS instances b/t a Juniper M10i and
> an Alcatel7705. The difference seems to be 14.
> Unfortunately Alcatel does not have an
> "ignore-mtu-mismatch" switch.
Not sure what ALU do, but if it's anything like I
13 4:06 AM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Juniper MX240 to Alcatel SAS-M epipe
Hi All
I am triing to configure link between MX240 and SAS-M. I want to terminate
Alcatel epipe on MX. I used l2circuit to do this. I can ping address in the
Internet but not every webpage work. I think the
Hi All
I am triing to configure link between MX240 and SAS-M. I want to terminate
Alcatel epipe on MX. I used l2circuit to do this. I can ping address in the
Internet but not every webpage work. I think the problem is in MTU in
epipe. Alcatel has MTU 1522. How to calculate MTU size for MX? Thanks f
12 matches
Mail list logo
