People, We are trying to create some VPLS tunnel with MK equipments.
Documentation shows that with some cisco routes it works fine. We need to finish the tunnel under a MX5 router and re-route the encapsulate traffic from the MX5 router to give some internet L3 (inet.0 access). For this we do the following configuration: set chassis fpc 1 pic 0 tunnel-services bandwidth 1g set interfaces ge-1/0/3 flexible-vlan-tagging set interfaces ge-1/0/3 encapsulation flexible-ethernet-services set interfaces ge-1/0/3 unit 512 encapsulation vlan-vpls set interfaces ge-1/0/3 unit 512 vlan-id 512 set interfaces ge-1/0/3 unit 512 family vpls set routing-instances vpls instance-type vpls set routing-instances vpls interface ge-1/0/3.512 set routing-instances vpls protocols vpls tunnel-services devices vt-1/0/10 set routing-instances vpls protocols vpls vpls-id 100 set routing-instances vpls protocols vpls mtu 1500 set routing-instances vpls protocols vpls ignore-mtu-mismatch set routing-instances vpls protocols vpls neighbor 192.168.100.2 set interfaces lo0 unit 0 family inet address 192.168.100.1/3 set interfaces vt-1/0/10 unit 0 family inet unnumbered-address lo0 But we cannot see any flow or ping between sides (end tunnel sides). Does anyone has tried to close a VPLS connection between junos and MK before ? Any tip for how to configure it ? Thanks a lot, Giuliano Giuliano Cardozo Medalha Systems Engineer +55 (17) 3011-3811 +55 (17) 8112-5394 JUNIPER J-PARTNER ELITE giuli...@wztech.com.br http://www.wztech.com.br/ _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp