Title: Re: [j-nsp] Load Balancing on 2x MSPIC 100 for NAT
Very nice trick:)
Even found on juniper-nsp
http://puck.nether.net/pipermail/juniper-nsp/2006-February/006094.html
Thanks guys!
Peter
5) Create the service-filters:
set firewall family inet service-filter SS_PART1_FILTER term
Title: Re: [j-nsp] Load Balancing on 2x MSPIC 100 for NAT
The config that Artur proposed works great on M10i/M7i with 2xMSPIC + 1x ADV II PIC, without any problems or licenses.
Peter Okupski
--
Best regards,
Pajlatek mailto:pajla...@widzew.net
Hi
Juniper has introduced a load balancing functionality on the MX router.
The load balancer runs on the MS-DPC.
https://developer.juniper.net/content/jdn/en/marketplace/discover/applic
ation-gallery/juniper-applications/RADWAREADC.html
http://www.juniper.net/us/en/products-services/software
> 5) Create the service-filters:
>
> set firewall family inet service-filter SS_PART1_FILTER term part1 from
> source-
> address 10.100.0.0/17
> set firewall family inet service-filter SS_PART1_FILTER term part1 then
> service
> set firewall family inet service-filter SS_PART1_FILTER term default t
Thank you Artur, to provide me with such a detail description. The
cgn-pic trigger was tested by me(on m10i/m7i) 2 days ago during
upgrade to Junos 11.4 and it gave us some more juice from the card we are
using now, thus giving us
time to test new config.
The LB config from the offic
On Thursday 12 of January 2012 21:50:14 Pajlatek wrote:
> Hi
> I am searching for any one that is using more than 1 MSPIC 100 in M-
> routers (M10i or M7i) and does a load-balance between them to get the
> additional thruoutput over 1Gb/s
>
I'm not sure if it's going to work on M10i/M7i but it
Hi
I am searching for any one that is using more than 1 MSPIC 100 in M-
routers (M10i or M7i) and does a load-balance between them to get the
additional thruoutput over 1Gb/s
I recived some config from last PDF - Carrier Grade Nat (juniper 2011)
but it seems it missing few details and is not wo
7 matches
Mail list logo