Hi Folks,
I want to load balance multiple GRE tunnels over a number of circuits
between a couple of routers. Since the routers will load balance
per-flow and not per-packet, will the routers be able to distinguish
between the tunnels ?
The problem is that the tunnels will all be between the same IP
addresses. AFAIK the layer3/4 info the router will use to load-balance
is as follows:
* Source IP address
* Destination IP address
* Protocol
* Source port number
* Destination port number
* Incoming interface index
Since all of these will be identical, what will happen?
Thanks,
Leigh Porter
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
