Official scaling numbers says 4,000 for L2TP on MX80.
http://www.juniper.net/techpubs/en_US/release-independent/junos/information-products/pathway-pages/subscriber-access/subscriber-management-scaling-values.xls
PPPoE uses 2 IFL only when there is a VLAN per subscriber.
-Original
Hi,
Check out the feature map below:
https://www.juniper.net/techpubs/en_US/junos12.3/information-products/pathw
ay-pages/subscriber-access/technology-overview-graphic.html
Here¹s the relevant L2TP section:
https://www.juniper.net/techpubs/en_US/junos13.2/information-products/pathw
Also make sure you talk to your Juniper SE and engage him in your plans -
make sure you understand which code releases you require for your
deployment. The last I checked, LNS was not supported on MX80 but that
may have changed in recent 13.2 code.
Like everything there’s several ways to
Am 19.10.2013 21:44, schrieb Enoch Nyatoti:
Hello,
I am new to Juniper hence my request. We would like to deploy BRAS and LAC
functionality on MX80 routers to existing Cisco NAS and I was wondering if you
could give me a lead on
how to configure these features in Junos including the relevant
Thanks for bringing that up . 16,000 IFL¹s and PPPOE uses two IFL¹s per
subscriber and the box doesn¹t handle more than 4,000 PPPOE customers very
well. There has been some challenges with Juniper identifying how far the
box will really scale - we tell our customers to not go above 4,000 as a
how much users do you want to terminate on your MX80 ?
Keep in mind, that there is a limit of 16.000 IFLs. When you plan to use
hierarchical qos, better go to a bigger platform.
Good luck with MX80 as a BRAS for 16000 users. Given its weak CPU,
you should expect the practical limit to be
Also,
You can only buy the 4000 user license for the MX80 midrange (MX5-MX80)
...Skeeve
*Skeeve Stevens - *eintellego Networks Pty Ltd
ske...@eintellegonetworks.com ; www.eintellegonetworks.com
Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve
facebook.com/eintellegonetworks ;
Hello,
I am new to Juniper hence my request. We would like to deploy BRAS and LAC
functionality on MX80 routers to existing Cisco NAS and I was wondering if you
could give me a lead on
how to configure these features in Junos including the relevant PPPoE
interface configuration. The idea is
8 matches
Mail list logo