Hi,
I am facing L2VPN Martini tunnel issue. In my environment Martini tunnel shows UP but CEs are not able to communicate end-to-end. I have configured all PE and P router on logical routers and CE are configured on physical routers. Following is connectivity CE1 ==> PE1 ==> P ==> PE2 ==> CE2 Martini works fine if I connect CE2 to P router directly but while connecting CE2 with PE2, CEs are not communicating end-to-end. I have also changed MTU size of logical tunnel interface due to dual label appends but no success. Though same config and topology works fine with physical routers. Any one came across same issue L2VPN with logical router. Any hint? Following is configuartion and output. aa...@test# run show l2circuit connections logical-router PE1 Neighbor: 172.16.100.6 Interface Type St Time last up # Up trans fe-1/3/1.800(vc 2) rmt Up Oct 19 08:02:38 2009 1 Local interface: fe-1/3/1.800, Status: Up, Encapsulation: VLAN Remote PE: 172.16.100.6, Negotiated control-word: Yes (Null) Incoming label: 100176, Outgoing label: 100336 [edit] aa...@test# aa...@test# show interfaces fe-1/3/1 vlan-tagging; encapsulation vlan-ccc; [edit logical-routers PE1] aa...@test# show interfaces fe-1/3/1 unit 800 { encapsulation vlan-ccc; vlan-id 800; family ccc; } [edit logical-routers PE1] aa...@test# *-------------* ** aa...@test# run show l2circuit connections logical-router PE2 Neighbor: 172.16.100.2 Interface Type St Time last up # Up trans fe-1/3/0.800(vc 2) rmt Up Oct 19 08:02:30 2009 1 Local interface: fe-1/3/0.800, Status: Up, Encapsulation: VLAN Remote PE: 172.16.100.2, Negotiated control-word: Yes (Null) Incoming label: 100336, Outgoing label: 100176 [edit logical-routers PE2] aa...@test# Regards. Aamir _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp