Ermm Feel weird asking this but can I do NAT on a MX5?
It doesn't seem have the features:
# set services ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
rpm
You can only do 1:1 NAT. One to many is not supported until the new service
mic is ready.
On Fri, Dec 14, 2012 at 4:25 PM, Luca Salvatore l...@ninefold.com wrote:
Ermm Feel weird asking this but can I do NAT on a MX5?
It doesn't seem have the features:
# set services ?
Possible
Yeah I know that... but its not even showing up in the config...
Luca
From: ashish verma [mailto:ashish.s...@gmail.com]
Sent: Friday, 14 December 2012 4:35 PM
To: Luca Salvatore
Cc: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] NAT on MX5?
You can only do 1:1 NAT. One to many
As far as I am aware - not at the moment.
I believe there is a Serivces Module coming out which goes in the back -
next year some time... no details thoughl
...Skeeve
*
*
*Skeeve Stevens, CEO - *eintellego Pty Ltd
ske...@eintellego.net ; www.eintellego.net
Phone: 1300 753 383; Cell +61 (0)414
...@gmail.com]
*Sent:* Friday, 14 December 2012 4:35 PM
*To:* Luca Salvatore
*Cc:* juniper-nsp@puck.nether.net
*Subject:* Re: [j-nsp] NAT on MX5?
** **
You can only do 1:1 NAT. One to many is not supported until the new
service mic is ready.
** **
On Fri, Dec 14, 2012 at 4:25 PM
You can, but only 1-to-1 NAT (eg: static NAT)
Still waiting on a services module...
Config is a little different for inline - to turn it on you need an inline
services interface:
set chassis fpc 0 pic 0 inline-services bandwdith 10g
set interfaces si-0/0/0 unit 0 family inet
then you use
Thanks guys. A reboot actually fixed it. Weird.
On 14/12/2012, at 5:02 PM, Ben Dale bd...@comlinx.com.au wrote:
You can, but only 1-to-1 NAT (eg: static NAT)
Still waiting on a services module...
Config is a little different for inline - to turn it on you need an inline
services
7 matches
Mail list logo