7;; [EMAIL PROTECTED]
Subject: Re: [j-nsp] PtP link over FR
On Thu, Jul 17, 2008 at 07:49:09AM -0400, Scott Morris wrote:
> There is no ARP in frame-relay. More specifically, on a P2P
> subinterface, there's no mapping either.
I think you're mis understanding my suggestion, I was sugge
27; and 10.1.1.2/27 configured on B towards 'Juniper'
/Jesper
>
> Scott
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Jesper Skriver
> Sent: Thursday, July 17, 2008 7:24 AM
> To: Farhan Jaffer
> Cc: Juniper Puck;
Thanks for all.
It was one mistake from my side. I used management interface ip
address for routes on Juniper :)
It's working fine now.
Thanks again.
-FJ
On Thu, Jul 17, 2008 at 4:06 PM, Farhan Jaffer <[EMAIL PROTECTED]> wrote:
> Hi,
>
> There is an interesting situation, let me discuss the s
y 17, 2008 7:24 AM
To: Farhan Jaffer
Cc: Juniper Puck; [EMAIL PROTECTED]
Subject: Re: [j-nsp] PtP link over FR
Let me guess, on Cisco Router A you got an ARP entry for Cisco Router B's
address when you put a Cisco router in the middle, as the Cisco router has
proxy-arp enabled by default
-Original Message-
From: Mark Tinka [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 17, 2008 7:25 AM
To: juniper-nsp@puck.nether.net; [EMAIL PROTECTED]
Cc: 'Farhan Jaffer'; [EMAIL PROTECTED]
Subject: Re: [j-nsp] PtP link over FR
On Thursday 17 July 2008 19:13:50 Scott Morr
Let me guess, on Cisco Router A you got an ARP entry for Cisco
Router B's address when you put a Cisco router in the middle, as
the Cisco router has proxy-arp enabled by default.
Or to put it more clearly the IP addresses used FR p2p pvc is a
subset of the IP addresses used on the link between Cis
than Cisco LMI, which Juniper does support.
HTH,
Scott
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Farhan Jaffer
Sent: Thursday, July 17, 2008 7:07 AM
To: Juniper Puck; [EMAIL PROTECTED]
Subject: [j-nsp] PtP link over FR
Hi,
There is an interesting
Hi,
There is an interesting situation, let me discuss the scenario first,
Cisco Router A (same n/w) Juniper Router -(FR
point-to-point pvc) --- Cisco Router B.
PVC is Active & point to point connectivity is OK. But the ping
response from cisco router A to B via FR is unreachable
8 matches
Mail list logo
