Re: [j-nsp] RE-600 SOLID STATE DRIVE NOT RECOGNIZED

2011-08-25 Thread Jonas Frey (Probe Networks)
In general every SSD (MLC/SLC) should work. Just need to make sure that you either get a PATA or SATA one (depending on your type of RE) and that its 2,5" form factor. If it doesnt work its in 99% of all cases the jumper for master/slave/cable select. Just try a different setting... you cant damag

Re: [j-nsp] RE-600 SOLID STATE DRIVE NOT RECOGNIZED

2011-08-25 Thread Jeff Wheeler
On Thu, Aug 25, 2011 at 3:00 PM, Mario Andres Rueda Jaimes wrote: > I'm trying to install a 8GB SSD in a RE-600 with compact flash of 2G but > > Anybody has performed this before or has suggestions ? We use this model drive, a 16GB with old-style parallel IDE connector: http://www.amazon.com/gp/p

[j-nsp] RE-600 SOLID STATE DRIVE NOT RECOGNIZED

2011-08-25 Thread Mario Andres Rueda Jaimes
Hi all I'm trying to install a 8GB SSD in a RE-600 with compact flash of 2G but when i'm running the installation process with a PCMCIA the RE doesn't recognize the Drive. the above message is displayed Discovered that flash disk = ad0 , hard disk = ad1 ad1: atacontrol: device not found: No suc