[j-nsp] SRX and not working VRRP

Hi I have SRX100 running 11.4R6.5 and I cannot make VRRP working. I have configuration like below: admin@srx100 show configuration interfaces fe-0/0/0 unit 0 { family inet { address 10.0.0.69/29 { vrrp-group 0 { virtual-address 10.0.0.70;

Re: [j-nsp] SRX and not working VRRP

On Wed, Jan 09, 2013 at 12:36:47AM +0100, Robert Hass wrote: Hi I have SRX100 running 11.4R6.5 and I cannot make VRRP working. I have configuration like below: admin@srx100 show configuration interfaces fe-0/0/0 unit 0 { family inet { address 10.0.0.69/29 {

Re: [j-nsp] SRX and not working VRRP

On Wed, Jan 9, 2013 at 12:40 AM, Chuck Anderson c...@wpi.edu wrote: set vrrp-group 0 accept-data Thanks a lot !. It helped. I used VRRP earlier on MX where this is not necessary to make VRRP work (but 10.4 on MX). Is above command is SRX (JunOS-ES) specific ? Rob

Re: [j-nsp] SRX and not working VRRP

Actually, you have to do that on an MX also. By default, the virtual IP will not accept anything destined for it (such as pings) unless you enable accept-data. The real IP of the interface will respond, but not the shared address. Now, I have seen hokey setups before where people had