If you use the router template, the Security requirements (i.e. needing
policies between zones) is removed, however the device still operates in "flow
mode"; unless you also specifically state that family inet is in "packet mode";
as well as using firewall filters on every interface and matchin
On Tue, Sep 21, 2010 at 5:35 PM, wrote:
> > > I have 2 x J4350's with 2 BGP feeds and each receiving about 320k
> routes
> > > with 1GB of RAM and I have no issues. My max RAM usage is 253MB. I'm
> > > running JunOS 10.1R2.8.
> >
> > Hmmm.
> >
> > Why 10.1R2.8 release? Juniper advice is to use
But... JUNOS 9.3 has problem on the enhanced-switching mode,
I have following config in chassis section,
fpc 6 {
pic 0 {
ethernet {
pic-mode enhanced-switching;
}
}
}
as soon as I commit, following error bumps up,
Sep 21 23:54:54 chassisd[889]: CHASSISD_
> > I have 2 x J4350's with 2 BGP feeds and each receiving about 320k routes
> > with 1GB of RAM and I have no issues. My max RAM usage is 253MB. I'm
> > running JunOS 10.1R2.8.
>
> Hmmm.
>
> Why 10.1R2.8 release? Juniper advice is to use 10.0R3.10 on every J device.
There are of course those
I was having an unrelated issue and this version was recommended to me by
JTAC. I have not had any issues with it and it turns out my issue was
configuration related not software relate and I just didn't see the need to
downgrade as everything has been working, but my config is that of a pretty
si
W dniu 10-09-20 16:15, Joe Goldberg pisze:
I have 2 x J4350's with 2 BGP feeds and each receiving about 320k routes
with 1GB of RAM and I have no issues. My max RAM usage is 253MB. I'm
running JunOS 10.1R2.8.
Hmmm.
Why 10.1R2.8 release? Juniper advice is to use 10.0R3.10 on every J device.
I have 2 x J4350's with 2 BGP feeds and each receiving about 320k routes
with 1GB of RAM and I have no issues. My max RAM usage is 253MB. I'm
running JunOS 10.1R2.8.
Joe
On Mon, Sep 20, 2010 at 2:11 AM, Maciej Jan Broniarz wrote:
> W dniu 10-09-20 00:40, Tim Harman pisze:
>
>> I've seen issue
W dniu 10-09-20 00:40, Tim Harman pisze:
I've seen issues with J2350 running out of memory with 2 full BGP feeds
(1G of RAM)
I might just be hitting the limits of the box.
Still, all i'm reciving is less then 360 000 prefixes all together.
1gb ram should be enough,
mjb
__
Hi,
I am running j6350 with 1gb ram. The Junos version is 10.0R3.10.
The router does 2 bgp sessions and few static routes - nothing else.
Still, the log file is full off:
Sep 18 09:45:02 jun-router /kernel: RT_PFE: NH IPC op 1 (ADD NEXTHOP)
failed, err 6 (No Memory)
Sep 18 09:45:02 jun-route
9 matches
Mail list logo