I have added the above-mentioned part to the kernel command line (file
/etc/default/grub), done "sudo update-grub", and rebooted.
After that, the ghost screen is still there (I only had used the
temporary workaround before booting).
I have run
sudo dmesg > dmesg-boot-log-20241031.txt
to obtain
Just disabling the ghost display in the System Settings was not helpful
for me, as with this the "Mirror" mode for the actual display and the
projector does not work. Probably this is another bug ...
--
You received this bug notification because you are a member of Kernel
Packages, which is subsc
The temporary workaround suggested in the initial description in the bug
report for NVidia, bug 2060268
-
[ Temporary Workaround ]
1. sudo rm /dev/dri/card0
2. Log in again.
-
also works here. I did not try the permanent workaround presented there,
but most probably it will also work.
E
I have the same problem.
I bought a ThinkPad T14 gen 5 in May this year. Worked perfectly with
Noble, but now, after the evil Oracular Oriole has eaten the nice cute
Numbats, I got the ghost screen as described in this bug report. This is
very disturbing, starting from the mouse pointer not stoppi
Moving to the kernel.
A already the command 'echo "Test" > /dev/lp0' causes the crash, it is
not caused by CUPS, but by the implementation of /dev/lp0 which is the
kernel.
** Package changed: cups (Ubuntu) => linux (Ubuntu)
--
You received this bug notification because you are a member of Kerne
For me it looks more like a kernel issue, as the Wi-Fi principally works
(network-manager must have set it up correctly). The weak signal issue
looks more like something in the driver.
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notificati
As manual setup of networking also does not work it looks more like a
kernel problem, moving ...
** Package changed: network-manager (Ubuntu) => linux (Ubuntu)
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.
** Changed in: network-manager (Ubuntu)
Status: New => Incomplete
** Changed in: linux (Ubuntu)
Status: Confirmed => Incomplete
** Changed in: ubuntu
Status: New => Incomplete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscr
Reported upstream as
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues/213
** Bug watch added: gitlab.freedesktop.org/NetworkManager/NetworkManager/issues
#213
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues/213
** Also affects: network-manager via
ht
Thanks. Closed network-manager tasks.
** Changed in: network-manager (Ubuntu Bionic)
Status: New => Invalid
** Changed in: network-manager (Ubuntu Cosmic)
Status: New => Invalid
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed
Does this need any fix in network-manager? Seems to be fully fixed by
the kernel patch.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1818204
Title:
Qualcomm Atheros QCA9377 wireless do
Please provice an error_log file of a failing print job, following the
instructions of the section "CUPS error_log" on
https://wiki.ubuntu.com/DebuggingPrintingProblems.
** Changed in: cups (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member o
This is for sure not a kernel bug. The printing workflow happens
completely in user space.
** Changed in: linux (Ubuntu)
Status: Incomplete => Invalid
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.la
Public bug reported:
.
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: linux-image-extra-4.4.0-57-generic 4.4.0-57.78
ProcVersionSignature: Ubuntu 4.4.0-58.79-generic 4.4.35
Uname: Linux 4.4.0-58-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.4
Architecture: amd64
AudioDevicesInUse:
USE
CUPS is the printing subsystem. I do not know exactly where the
Bluetooth support belongs to. Moving to the kernel ...
** Package changed: cups (Ubuntu) => linux (Ubuntu)
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
ht
OdyX, can you update ptouch-driver to the newest version, to include the
fix? Thanks.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to hwdata in Ubuntu.
https://bugs.launchpad.net/bugs/1604036
Title:
Upgrade printer-driver-ptouch to supp
For the usb.ids problem I added usbutils, hwdata, and libosinfo tasks,
as according to "dpkg -S usb.ids" they all provide an usb.ids file.
** Also affects: usbutils (Ubuntu)
Importance: Undecided
Status: New
** Also affects: hwdata (Ubuntu)
Importance: Undecided
Status: New
*
Public bug reported:
.
ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: linux-image-4.2.0-18-generic (not installed)
ProcVersionSignature: Ubuntu 4.2.0-16.19-generic 4.2.3
Uname: Linux 4.2.0-16-generic x86_64
ApportVersion: 2.19.1-0ubuntu5
Architecture: amd64
AudioDevicesInUse:
USER
The use of /usr/share/cups/usb/org.cups.usb-quirks makes it easier to
include printer-model-specific quirk rules into the packaging of Ubuntu.
This way on setup of a print queue the lpadmin command does not need to
be executed. CUPS already knows how to treat the printer by the
/usr/share/cups/usb/
The command
lpadmin -p Samsung-ML-1250 -o usb-no-reattach-default=true
saves the changes forever, the changes are kept also after a reboot.
To undo the changes, you have to run
lpadmin -p Samsung-ML-1250 -R usb-no-reattach-default
The editing of the /usr/share/cups/usb/org.cups.usb-quirks file
Gannet, no need to open a new bug on CUPS. I have added a CUPS task now.
Your printer (Samsung ML-1250) has the USB IDs
ID 04e8:300e Samsung Electronics Co., Ltd Laser Printer
and
lpadmin -p Samsung-ML-1250 -o usb-no-reattach-default=true
fixes the problem for you.
Please first check whether
** Also affects: cups (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1495971
Title:
Samsung ML-1250 prints only first job and then di
Gannet, you did not answer my question of comment #7. Please follow the
instructions here:
https://wiki.ubuntu.com/DebuggingPrintingProblems#USB_printer_does_not_print_or_prints_garbage
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linu
** Summary changed:
- Samsung ML-1250 ptints only first job and then disconnects
+ Samsung ML-1250 prints only first job and then disconnects
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs
Please also check the USB compatibility of your printer following the
instructions of the section "USB printer does not print or prints
garbage" on https://wiki.ubuntu.com/DebuggingPrintingProblems.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscr
For me it looks like some bad interference between the USB printer and
the kernel. Adding kernel task ...
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in
Thanks for the hint, but your link to the complete instructions is not
working. Can you post the correct link here? Thanks.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210748
Title:
You get
$ sudo usb_printerid /dev/usb/lp0
Error: Input/output error: GET_DEVICE_ID on '/dev/usb/lp0'
but /dev/usb/lp0 exists and has the correct permissions. Looks like a
kernel bug.
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notificati
This problem is on the kernel level, not in CUPS. Moving to the kernel
...
Please also follow the instructions of the section "Parallel Port
Printer" on https://wiki.ubuntu.com/DebuggingPrintingProblems. Thanks
** Package changed: cups (Ubuntu) => linux (Ubuntu)
** Changed in: linux (Ubuntu)
Usually, it is possible that it can be communicated with different USB
devices independently at the same time. This looks like some USB stack
problem, in the kernel or in libusb.
What happens here is that data is streamed to a first printer (the
Epson) and while this is happening a new print job f
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Also affects: libusb-1.0 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.lau
Looks like that libusb and/or the kernel has problems communicating with
this USB printer. Adding appropriate tasks ...
** Also affects: libusb (Ubuntu)
Importance: Undecided
Status: New
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this
Support for a parallel port card is a kernel problem, not a CUPS
problem. Moving ...
** Package changed: cups (Ubuntu) => linux (Ubuntu)
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1244
As a workaround you can try the following setup (kernel module "usblp"
must be loaded, check with "lsmod"):
lpadmin -p test -E -v parallel:/dev/usb/lp0 -P /etc/cups/ppd/DESKJET-
710C.ppd
Try to print on this new print queue named "test". Does it work?
Another workaround is to connect your printe
Please do the following on Ubuntu 13.10:
Do you have a file named
/usr/share/cups/usb/org.cups.usb-quirks
Can you attach it?
Can you follow the instructions of the section "USB printer does not
print or prints garbage" on
https://wiki.ubuntu.com/DebuggingPrintingProblems?
Please also try editi
I have updated the BIOS now and the problem still persists.
till@till:~$ sudo dmidecode -s bios-version && sudo dmidecode -s
bios-release-date
BHZ7710H.86A.0100.2013.0517.0942
05/17/2013
till@till:~$
--
You received this bug notification because you are a member of Kernel
Packages, which is sub
Downgrade the BIOS to 1.52 (or do not upgrade to a BIOS newer than
1.52).
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210748
Title:
On Lenovo Thinkpad Twist internal mouse does not w
Christopher, the URL of my improved posting to the dri-devel mailing
list is:
http://lists.freedesktop.org/archives/dri-
devel/2013-September/046056.html
Also no reply so far.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubun
Any other info or test needed?
** Changed in: linux (Ubuntu)
Status: Expired => Confirmed
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1162737
Title:
[LENOVO 7417CTO] Wakes up
Christopher, the URL of my posting to the dri-devel mailing list is:
http://lists.freedesktop.org/archives/dri-
devel/2013-September/044996.html
There is no reply so far.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
h
Can the removal of GIT commit 740922e be done in the kernel package for
Ubuntu Saucy?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1167301
Title:
8086:0166 [ThinkPad Twist S230u 3347]
Kamak, which product/component should I choose on bugzilla.kernel.org?
There is no DRM.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1167301
Title:
8086:0166 [ThinkPad Twist S230u 3347
The final result of my bisect is actually what I guessed in the previous
comment (see output below). The patch (also below) is simple and one can
easily see that undoing it would solve the problem.
It seems that some monitors (including my monitor) report that they are
non-continuous frequency but
I think I have found the culprit:
till@till-twist:~/kernel/linux-stable$ git bisect good
Bisecting: 4 revisions left to test after this (roughly 2 steps)
[740922ee575f8ee4daa2bfd3db5f69dd7573fc76] drm: don't add inferred modes for
monitors that don't support them
till@till-twist:~/kernel/linux-st
Yes, I have found out already that in the mainline I have to check 3.8
as newest good and 3.8.1 as oldest bad kernel release. Currently I am
doing a doing a GIT bisect between these two. According to the estimates
by "git bisect" I am currently building for the third-last stage,
finishing in 20 min
The last good kernel was 3.8.0-8.17 and the first bad kernel was
3.8.0-9.18. The changelog between the two releases is rather small but I
do not really have an idea which change could be the culprit.
See
https://launchpad.net/ubuntu/+source/linux/3.8.0-9.18
I tried to bisect commits with git, bu
Problem still persists with the new mainline kernel:
Linux till-twist 3.11.0-031100-generic #201309021735 SMP Mon Sep 2
21:36:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 32767 x 32767
LVDS1 connected primary 1024x768+0+0 (normal left inverte
Since I have tried the kernels 3.8, 3.9, and 3.10 yesterday, I am not
able to reproduce the bug any more, even not with the current Ubuntu
kernel (3.11.0-3-generic) and the previous one (3.11.0-2-generic). Also
the problem of suspend automatically waking up immediately again (bug
1213233) does not
I get the problem only with the 3.11.x kernel. All the old (3.10.x and
earlier) kernels are OK.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1213239
Title:
Bluetooth subsystem dies aft
This is independent whether the Unity desktop is run with XMir or normal
X.
I did not use Suspend for very long time, can even be the first time for
me with Saucy on this machine.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in U
Sometimes, the Bluetooth devices, sometime only one of them, work again
after suspend, but in most cases they are dead.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1213239
Title:
Blue
Public bug reported:
I am using Saucy in XMir mode with the standard Unity desktop on the
Lenovo Thinkpad Twist.
When I suspend the system not only the suspend itself is broken (bug
1213233) but also after waking up I cannot use my Bluetooth devices any
more (mouse, keyboard). I have to reboot to
Will modemmanager 0.7.991 make it into Saucy?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1169117
Title:
REGRESSION: MBIM kernel suppport should be disabled until userspace
support
I have downgraded the BIOS to 1.52 again (unfortunately, I do not have
1.53 ... 1.56) and the problem goes away. So it was actually caused by
the BIOS update.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.la
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210748
Title:
On Lenovo Thinkpad Twist internal mouse does not work a
apport information
** Attachment added: "UdevLog.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766943/+files/UdevLog.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210
Added apport data of a cold start with not working touchpad/nipple and
an official kernel booted. The first attempt with mainline kernel did
not send a lot of data.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://b
apport information
** Attachment added: "ProcModules.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766939/+files/ProcModules.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/b
apport information
** Attachment added: "WifiSyslog.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766944/+files/WifiSyslog.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bug
apport information
** Attachment added: "CurrentDmesg.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766932/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net
apport information
** Attachment added: "Lspci.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766934/+files/Lspci.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210748
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766936/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/b
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766938/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad
apport information
** Attachment added: "PulseList.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766940/+files/PulseList.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/
apport information
** Attachment added: "RfKill.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766941/+files/RfKill.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210748
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766937/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/b
apport information
** Attachment added: "AlsaInfo.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766929/+files/AlsaInfo.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/12
apport information
** Attachment added: "UdevDb.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766942/+files/UdevDb.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210748
apport information
** Attachment added: "CRDA.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766931/+files/CRDA.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210748
Ti
apport information
** Attachment added: "IwConfig.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766933/+files/IwConfig.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/12
apport information
** Attachment added: "Lsusb.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766935/+files/Lsusb.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210748
Now I attach the dmesg output after a reboot, with touchpad and nipple
working.
** Attachment added: "dmesg-reboot.txt"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1210748/+attachment/3766928/+files/dmesg-reboot.txt
** Description changed:
I have a Lenovo ThinkPad Twist (convertib
apport information
** Attachment added: "BootDmesg.txt"
https://bugs.launchpad.net/bugs/1210748/+attachment/3766930/+files/BootDmesg.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/
Added apport information of the system after turning on (cold start)
with the touchpad/nipple not working. Attached is the dmesg output of
this situation.
** Attachment added: "dmesg-cold-start.txt"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1210748/+attachment/3766927/+files/dmesg-c
apport information
** Tags added: apport-collected saucy
** Description changed:
I have a Lenovo ThinkPad Twist (convertible ultrabook with Core i7
processor) with touch screen, touch pad, rubber nipple mouse, and
external Bluetooth mouse. From these 4 mice 2 always work, the touch
scree
Here is what that user wrote:
--
Touch Pad not working on Shutdown, Works after Reboot Though
July 19, 2013Uncategorized13.10, laptop, thinkpad, touchpaduser2304751
I have a Thinkpad Twist and Ubuntu 13.10.
Whenever I restart my touch pad always works.
Whenever I shutdown, and turn it b
Public bug reported:
I have a Lenovo ThinkPad Twist (convertible ultrabook with Core i7
processor) with touch screen, touch pad, rubber nipple mouse, and
external Bluetooth mouse. From these 4 mice 2 always work, the touch
screen and the external Bluetooth mouse.
The touchpad and the nipple do no
I have tried a Quantal live CD now and there the bug does not show. The
external monitor mirrors the image of the internal monitor in exactly
the same resolution as the internal monitor, 1366x768.
I have also run "xrandr" and the external monitor reports back many more
modes than under Raring or S
I have updated to said kernel now and the problem still persists.
till@till-saucy-stick:~/twistlaptop$ uname -a
Linux till-saucy-stick 3.11.0-031100rc3-generic #201307290035 SMP Mon Jul 29
04:36:40 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
till@till-saucy-stick:~/twistlaptop$
** Tags removed: ne
I have updated the BIOS now:
till@till-saucy-stick:~$ sudo dmidecode -s bios-version && sudo dmidecode -s
bios-release-date
GDET97WW (1.57 )
07/01/2013
till@till-saucy-stick:~$
and the problem still persists.
--
You received this bug notification because you are a member of Kernel
Packages, w
System is Saucy 64 bit with 3.10.0-5-generic #14-Ubuntu kernel.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1167301
Title:
[ThinkPad Twist S230u 3347] REGRESSION: Mirroring display wo
I did not yet update the BIOS, with the old BIOS (updated some months
ago) I have still the problem.
sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date
GDET92WW (1.52 )
02/05/2013
till@till-saucy-stick:~/twistlaptop$
I wil try the BIOS update later.
--
You received this bug
I have a completely up-to-date Raring (Kernel 3.8.0-27-generic) and the
problem still persists.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1162737
Title:
[LENOVO 7417CTO] Wakes up fr
83 matches
Mail list logo
