2008/11/25 Bhavesh Kamani <[EMAIL PROTECTED]>:
> #ifconfig eth0 192.168.0.1 netmask 255.255.255.0
> #ifconfig eth1 192.168.0.5 netmask 255.255.255.0
As Dinesh pointed out, netmask should be 255.255.255.254
> #route add -net 192.168.0.5 netmask 255.255.255.0 gw 192.168.0.5 dev eth0
> but thos
On Tue, Nov 25, 2008 at 3:19 PM, Bhavesh Kamani
<[EMAIL PROTECTED]> wrote:
> Hi Team,
>
> I want to test ethernet driver for NIC, I have only one PC
with two different NICs(for both drivers are >different), So I disabled
loopback and connected both the NICs using cross cab
I guess after -net option you should specify network address
something like "-net 192.168.0.0" and if you want to further divide this
network something like 192.168.0.x and 192.168.0.y, you need to change the
netmask 255.255.255.x, depending upon how you divide your network.
By the way, when both c
Bhavesh Kamani wrote:
Hi Team,
I want to test ethernet driver for NIC, I have only one PC with
two different NICs(for both drivers are different), So I disabled
loopback and connected both the NICs using cross cable. Output of
"ifconfig" is displaying both the interfaces and ip address is
On Tue, Nov 25, 2008 at 3:19 PM, Bhavesh Kamani <[EMAIL PROTECTED]>wrote:
> Hi Team,
>
> I want to test ethernet driver for NIC, I have only one PC with two
> different NICs(for both drivers are different), So I disabled loopback and
> connected both the NICs using cross cable. Output of "ifco
Hi Team,
I want to test ethernet driver for NIC, I have only one PC with two
different NICs(for both drivers are different), So I disabled loopback and
connected both the NICs using cross cable. Output of "ifconfig" is
displaying both the interfaces and ip address is also set for both the
inte