[kicad-users] Re: 3-pole relay with an 11-pin socket, symbol/footprint?

--- In kicad-users@yahoogroups.com, "anders.gustafsson99" wrote: > > Any ideas where to find one? relay.lib contains thousands of relays, > but finding the right one is like finding the proverbial needle. > > Relay is essentially one of these: > http://octopart.com/info/Omron/MK3P5-S-DC12 > Hi,

[kicad-users] Re: 3-pole relay with an 11-pin socket, symbol/footprint?

--- In kicad-users@yahoogroups.com, "anders.gustafsson99" wrote: > > Any ideas where to find one? relay.lib contains thousands of relays, > but finding the right one is like finding the proverbial needle. > > Relay is essentially one of these: > http://octopart.com/info/Omron/MK3P5-S-DC12 > Hi,

Re: [kicad-users] Re: Mask Clearances for individual components..

Hi, I think this will not work. When creating a module, pcbnew seems to take in account the current settings, but they are changed after the general settings are changed. Try to speak to your manufacturer. For us it has worked. We made the pcb with our pcb maker accuracy, 0.1 mm for the mask. A

[kicad-users] 3-pole relay with an 11-pin socket, symbol/footprint?

Any ideas where to find one? relay.lib contains thousands of relays, but finding the right one is like finding the proverbial needle. Relay is essentially one of these: http://octopart.com/info/Omron/MK3P5-S-DC12

[kicad-users] Re: Mask Clearances for individual components..

Thanks Pedro, How about if I clear the mask setting when laying down the SMD pads in the editor and then add my own mask area Would that work? Or will Kicad just put a mask back in for me? Graham

Re: [kicad-users] Mask Clearances for individual components..

Hi, >From my experience, these references are set for the whole pcb. Pedro. > Hi, > > Is it possible to have a mask clearance for individual components. > I have some fine pitch .5mm items that need a mask clearance of .05mm > in order to avoid shorts. I can set this in "tracks and Widths" bu

[kicad-users] Mask Clearances for individual components..

Hi, Is it possible to have a mask clearance for individual components. I have some fine pitch .5mm items that need a mask clearance of .05mm in order to avoid shorts. I can set this in "tracks and Widths" but it appears to set it fot the whole PCB. Thanks Graham

Re: [kicad-users] Re: Zones

I'm using 20080825c, same as you. Fortunately the crashing wasn't an insurmountable problem for me, but I'm pleased to hear it sounds like it's been fixed. One of the things that impressed me about kicad when I first used it was its stability. I too think the developers have done a brilli