KR> kr2 for sale

2010-04-14 Thread Lee Van Dyke
If anybody sees this ad and wants the info. e-mail me @ l...@vandyke5.com Lee Van Dyke KR 2 AIRPLANE . $14,500 . AVAILABLE FOR SALE . Rand KR2 VW 2100 tri-plane(experimental); new annual March 2010; flew from AZ to NM end of March; upholstered inside; too much plane for me; asking

KR> Wheels

2010-04-14 Thread Ronald Wright
Simple solution to the pinched tube. Take a plastic bottle and cut a strip around the bottle (like a bleach bottle) about the width of the inner part of the hub. When you install the tube and tire on one half the rim, place the plastic piece inside and then push the other rim inside it.

KR> Wheels

2010-04-14 Thread Dan Heath
Thanks KR guys. That is a very good idea and I will implement it. See N64KR at http://KRBuilder.org - Then click on the pics  See you at the 2010 - KR Gathering in Richmond, Ky - I39 There is a time for building and a time for FLYING and the time for Flying has begun. Daniel R. Heath - 

KR> Wheels

2010-04-14 Thread John C Edwards
I have a kr-1 with the same old Rsoenhan split wheel as you describe. I had a flat last summer due to a safety wire that punctured the sidewall because I let the tire pressure get too low etc, etc.. I noticed that when I took it apart and patched the tube, that the original owner/builder had

KR> Wheels

2010-04-14 Thread Dan Heath
I have the old Rosenhan split wheel. It has been impossible for me to get a tube in it without cutting the tube by pinching it between the halves. I have lightly inflated the tube, put baby powder all over everything, and still the tube got split. The really bad thing about this, is that it

KR> color dragonfly canopy

2010-04-14 Thread Mark Jones
The color choice is all up to you. Mine is the light grey and I am very happy with it. Not too dark for night flying either. Here are my links: http://www.flykr2s.com/gullwingdoor.html Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com - Original

KR> Aileron Nut Plates

2010-04-14 Thread Daniel Root
Aileron hinge saga continues Readers of an earlier post will recall that I couldn?t remove the screws holding my aileron hinges in place, because whatever was inside the spar, was spinning. Seeing no other way to get to the hardware, I cut an inspection hole in the bottom of the wing. As I

KR> color dragonfly canopy

2010-04-14 Thread stef...@kpnmail.nl
Hey guys, We just made the desision to go for a dragonfly canopy. Now we have the choice in 4 colors, Clear, Light gray, Medium gray, or EZI green. What color should you buy. Maybe some body can give me his site adres and color of his canopy so I have the impression what to buy. Or someone