Anyone using a Stromberg NA-S3 on a VW engine?
I have never scrutinized the plans that closely to notice where on the arm the
weights are supposed to be attached but years ago when I used to fly with a
friend in his KR2 ZS-WEC, his weights were in fact airfoil shaped like mini
wings and acted almost like spades in aerobatic planes it
N56ML's ailerons are balanced across the entire nose, by filling a 4130 tube
with lead, then hogging out the nose foam with a dull spade bit, slathering
it up with epoxy and micro, and then encapsulating it in place with carbon
fiber on the ends. I guess I did that in such a hurry (it was way
Kr friends.
I was wondering how many space you all have between the counterweight And the
egde of the hole in the aft of the aft spar. To prevent a aileron jam I am
thinking about 10 mm space around it.
Wat do you guys have ?
Thanks
Stef.
--
Steph and his dad are building the KR-2S see
Excellent point Dene. ?I noticed that many builders put their counterweights
below the counterweight arm so in normal cruise it is just below the wing skin
in the air stream and the recess for the counterweight is open when the aileron
is fully deflected up. ?I put my counterweights on top of
The gap around the aileron counter weight on my KR-2 is 1/4-inch at the
closest point where the weight comes through the wing skin. The arm goes
through the middle of the trailing aux spar; closest clearance on the arm is
1/8-inch. The counter weights are flatter and wider than the plans to
That should be more than adequate. ?I haven't looked at mine in a number of
years, but doubt that I have that much clearance. ?Just satisfy yourself that
the counterweight can not touch or bind under any circumstances.
BTW, your construction work looks really nice. ?Love the work on your wing
High altitude KR flying story 2014
Back in the day 1980's > Benton Air Field, Redding ,Ca the airshow fly in; a
Single seat KR was there it really looked sharp the black and yellow
checkerboard cowling and gold colored fuselage looked like a P51. The pilot was
from Weaverville,Ca had his own
I'll be coming up from VRB, and hope to run my 3000cc engine... My fourth CC.
Bill Zorc
772-713-0607 cell
Sent from my iPad
> On Mar 26, 2014, at 6:10 AM, Paul Visk wrote:
>
> Just wondering if anyone is going to CC #29 in Leesburg Fl. this weekenk.
> I'll be there to observe. I'll be
Just wondering if anyone is going to CC #29 in Leesburg Fl. this weekenk. I'll
be there to observe. ?I'll be working on my engine at CC #30
Paul Visk
Belleville, Il
618-406-4705
Sent from my Samsung Galaxy S?4
Just a short info here for anyone who might be interested.
Maybe all of you know this but it was news to me but then again I am
technically challenged!
After purchasing my samsung tab 3 and downloading the avare navigation
application I discovered that you do not need a wifi
11 matches
Mail list logo
