KR> Plywood orientation

For the spars you must put the primary grain of the plywood in the vertical. Plywood comes in 4-foot widths, but you need more than 7-foot width. So, you need to scarf 2 pieces to get the width and keep the vertical orientation. Common size for plywood is 8-foot length. So, you need to scarf

KR> Plywood orientation

Wicks has a "cut sheet that they use." It is for the standard measurements from the plans. If you are going to change any of your measurement your going to need to tweak the cuts a little. If you don't, you will have a lot of extra wook that will be short. ?With the price of the kit. There is

KR> 0200 piston high cpmpression

where can I buy LyCon's 9.5:1 pistons for the O-200 . I have found Light speed so far. Or does anyone of other pistons? Phil Matheson ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message

KR> Plywood orientation

Gary Wold wrote: >I am putting my KR2S spruce and plywood list together in order to get a >quote from Wicks. Looking at the plywood on their website, I see that there >are mahogany plywood orientations (angle) of 45 degree and 90 degree. The >plans are not clear as to which to use and I did

KR> 0200 piston high cpmpression

> Sent: Monday, March 30, 2015 at 10:53 PM > From: "Phillip Matheson via KRnet" > To: KRnet > Subject: KR> 0200 piston high cpmpression > > where can I buy LyCon's 9.5:1 pistons for the O-200 . > > I have found Light speed so far. > > Or does anyone of