Sorry for the repeat if this did post. I didn't ?see it.
Again this year I will be planning ?a parts run over to Wicks. (32 mile) on
Saturday the 29th. I'll ?be more then happy to pick your parts and bring them
out with me to save on shipping. Just tell them I'll ?be there on Saturday.
They need
FAA document AC 90-89A (now superseded by AC 90-89B) SECTION 11. ADDITIONAL
ENGINE TESTS, paragraph 1.e. Fuel Flow and Unusable Fuel Check: states the
method to determine the fuel flow needed by amateur built aircraft.
At the airworthiness inspection for my KR-2 the FAA inspector wanted to see
t
Still not here, hopefully soon.
On 2015-08-10 1:09 PM, Steve G. via KRnet wrote:
> No you're not. There probably in your mailbox today. They cleared customs on
> Friday.
>
> Steve Glover
>
> Sent from my electronic leash.
>
>> On Aug 10, 2015, at 10:02, Global Solutions via KRnet > list.krnet.org
Things might work out at the last minute for me to come to the
gathering...thinking about flying and camping rather than driving...is
there anyone still looking to share rental car cost?
https://sites.google.com/site/mykr2stretch/
https://sites.google.com/site/mykr2stretch/parts-for-sale
Got GREAT news today. The plans I ordered back in January this year
were shipped out today via priority mail.
Thanks Bill
On 8/10/2015 1:02 PM, Global Solutions via KRnet wrote:
> Still waiting on my plans from Aero I ordered in February
Still waiting on my plans from Aero I ordered in February so I thought
id ask the group if they had dimensions for an engine mount to fit a
110HP corvair engine in a KR2S?
I have welding and machine shop facilities.
Thanks
Stan
Again this year I will be planning ?a parts run over to Wicks. (32 mile) on
Saturday the 29th. I'll ?be more then happy to pick your parts and bring them
out with me to save on shipping. Just tell them I'll ?be there on Saturday.
They need to fit in my suitcase and be able to go on to an airplan
I'm slow at responding, but I have a engine mount the looks like the one
Mark is using hanging in my storage shed. If it could be used I give to
Keith for the shipping. It came off my old KR2.
Roger Bulla
rbulla2 at wic.net
-Original Message-
From: Bill Masquelier via KRnet
Sent: Monda
Stan wrote:
>>Still waiting on my plans from Aero I ordered in February so I thought
id ask the group if they had dimensions for an engine mount to fit a
110HP corvair engine in a KR2S?<<
See http://www.n56ml.com/corvair/mount_fit.html for a pretty good
idea...
Mark Langford, Harvest, AL
ML "
No you're not. There probably in your mailbox today. They cleared customs on
Friday.
Steve Glover
Sent from my electronic leash.
> On Aug 10, 2015, at 10:02, Global Solutions via KRnet list.krnet.org> wrote:
>
> Still waiting on my plans from Aero I ordered in February so I thought id
> as
It is not the same as a revmaster 2 of the engine holes are closer than the
other I am going to the airport to day I will get the dem
Sent from AOL Mobile Mail
-Original Message-
From: Mike Arnold via KRnet
To: KRnet
Cc: Mike Arnold
Sent: Mon, Aug 10, 2015 08:18 AM
Subject: Re: KR
I used 1/4" for my transfer lines and they worked fine. I think it took
me something like 5 minutes to transfer the whole 5 gallon tank and you
could hear when it was empty. On mine I only used one pump and had it
after the fuel selector. I didn't have a return line. If I transferred
too much f
We have a spare engine mount for a KR2
The engine side fits the stock VW mounts and the firewall side upper mounts are
16" on center,lower are 15 3/4 on center, upper to lower are 13 3/4 on center.
Engine side has the tubular mounts with the washer welded in the center.
Will sell for $100 plus shi
Is the Hapi case the same as a Diehl accessory case.
On Aug 9, 2015 7:48 PM, "Randy Moore Newbern Tn. N318RM via KRnet" <
krnet at list.krnet.org> wrote:
> I have a KR mount for a HAPI case i can make a copy of it
>
>
>
>
> Randy Moore
> challenger II sold
> avid mark IV
> KR II converted to
Getting close, 24 days. Things are moving well on this end and the excitement
is growing. There's still rooms available and plenty of camping space. If your
not attending and want a shirt or hat just let me know before 17 Aug. I have to
get the order in to make sure they're available to the atte
We have a spare engine mount for a KR2
The engine side fits the stock VW mounts and the firewall side upper mounts are
16" on center,lower are 15 3/4 on center, upper to lower are 13 3/4 on center.
Engine side has the tubular mounts with the washer welded in the center.
Will sell for $100 plus shi
16 matches
Mail list logo
