KR> Hand propping VW

Actually, that drawing is right here someplace, because I asked the same question years ago and someone responded by posting it. So it must be in the KRnet archives. It was originally in the KR Newsletter. Mike Taglieri On Nov 20, 2016 12:39 AM, "Patrick Driscoll via KRnet" wrote: > Joe,

KR> Replace retract gear

at list.krnet.org > -- next part -- A non-text attachment was scrubbed... Name: kr2 2.jpg Type: image/jpeg Size: 7722 bytes Desc: not available URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20161126/b3291065/attachment.jpg>

KR> Foam

A better source for AN970 washers is Wick Aircraft. There washers are a lot cheaper and they are a bigger supporter of the KR movement.? Paul Visk?Belleville Il ?618 406 4705 Sent from my Verizon, Samsung Galaxy smartphone Yes, use washers

KR> Hand propping VW

Want a KR-1 Boat, etc ? Send full E-Mail address so I can get you off list. Virg On 11/19/2016 6:37 PM, jibby212--- via KRnet wrote: > I am in Sarasota Florida, currently I am building an oven an am going to try > to blow the canopy a little taller so I can fit in it.

KR> Replace retract gear

This may be helpful http://krbuilder.org/gear/index.html See N64KR at http://KRBuilder.org - Then click on the pics 2016 KR Gathering - Mt. Vernon, Ill. Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gathering in Mt.

KR> Foam

> My question is do i need to replace all the foam I have been > digging out of the stub wing to get the Diehl gear in place and > squared up. Also did anyone just use little washers on there bolts > or did you fab some kind of plate to distribute the pressure > exerted on the gear over a

KR> Foam

Cody said: I"m trying to install a diehl main gear in place ?the conventional retract gear on my kr2. My question is do i need to replace all the foam. There is one nice thing about the KR. ?The foam is vary forgiving. Were ever there's a hole just square up the hole and glue in a new piece foam

KR> Foam - Replacing old retract with the Diehl Gear.

I cut out a section of the leading edge from top to bottom, as cleanly as possible, back to the spar. With the plane upside down, I also cut out a section on the bottom, behind the spar, large enough to allow me to work. I made all these cuts as cleanly as possible. If I were doing it today, I

KR> Foam

I am trying to install a diehl main gear in place of the conventional retract gear on my kr2. My question is do i need to replace all the foam I have been digging out of the stub wing to get the Diehl gear in place and squared up. Also did anyone just use little washers on there bolts or did