KR> AquaVenture Sloshkosh facts and figures

2010-08-02 Thread Eric Pitts
Attendance: 535,000 – Decrease of 7 percent from 2009. Total aircraft: More than 10,000 aircraft arriving at Wittman Regional Airport in Oshkosh and other airports in east-central Wisconsin. Total showplanes: 2,380, including 1,106 homebuilt aircraft, 635 vintage airplanes, 374 warbirds,

KR> hats off to Mark Langford

2010-07-30 Thread Eric Pitts
> The entry fee is usually $250 if paid early. I was late too and had to > pay the 275 also. > > Jeff So what does this fee get you for running this race? Thanks -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave w

KR> KR Gathering pre registration.

2010-07-11 Thread Eric Pitts
his if so sorry. But what were the prices of the shirts and hats? And was there any pic's of them? -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body

KR> Surprise! FCC Mandates Prohibition of 121.5 MHz ELTs]

2010-06-25 Thread Eric Pitts
the agency suggested aircraft operators would "migrate" to the newer 406 MHz ELTs only if the older technology ELTs were rendered illegal to use by FCC fiat. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention

KR> KR-1 on Ebay

2010-05-14 Thread Eric Pitts
http://cgi.ebay.com/ebaymotors/KR-1-Home-built-airplane-/260601634268?cmd=ViewItem=Motors_Aircraft=item3cad115ddc -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well pres

KR> Deleted KRnet archives

2010-04-24 Thread Eric Pitts
> If I/we are in error then I do apologize and I sincerely mean that. > > Regards, > > Myron (Dan) Freeman > Dan, I put you in and back ten pages. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the inten

KR> Wheel woes

2010-04-16 Thread Eric Pitts
> Dan, > Are you coating the tube and the inside of the tire with baby powder? I > do this and have never pinched a tube. > I coated my tires with baby powder and put just bit of air in the tube. They have been holding air for three years now. Not flying -- Eric Pitts Terre Hau

KR> For you diy'ers

2010-04-13 Thread Eric Pitts
http://www.aircooledtech.com/tools-on-the-cheap/soda_blaster/ -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, choc

KR> refinishing a hangar queen

2010-04-05 Thread Eric Pitts
> > I’m new to this body work and paint thing, so can somebody > point me to a URL or give me the steps “by the numbers”? > > This would be a good place to start http://curedcomposites.netfirms.com/finish.html -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystar

KR> Corvair for sale

2010-03-14 Thread Eric Pitts
http://terrahaute.craigslist.org/cto/1642991433.html -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one

KR> Carbon Fiber Carburetor Air Intake

2010-02-13 Thread Eric Pitts
> I was working in the hangar tonight and took a few more pictures of the > carbon fiber air intake that I made. Nice looking setup, but I need to ask. Are those wood spacers between the engine mount and the fire wall? -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net

KR> Web site

2010-02-11 Thread Eric Pitts
Phil down under, what is wrong with your web site? -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one

KR> kr video

2010-02-11 Thread Eric Pitts
> Do you know what engine is in that KR2? > > some kr video (1835 vw))) > enjoy > phill brookman > > > >

KR> Mix and distribute the fuel better

2009-11-15 Thread Eric Pitts
Dan I think you are getting before and after mixed up. Your own message states. "The 1/2” stainless steel vanes straighten the air before it reaches the throat of the carburetor and achieves better air/fuel distribution." Tha tornado Goes after the carb and keeps air fuel mixed. IMHO

KR> 2010 Gathering

2009-11-01 Thread Eric Pitts
> I'm not going to make everyone happy, no matter what I do:-) > > Dana, damed if you do, damed if you don't. As a nonflyer I feel you should do the best you can for those who will be flying in. We ground pounders can get by with just about anything. Just my 2 cents -- Eric Pitts Te

KR> Turtle Deck and Other Components

2009-10-28 Thread Eric Pitts
> I also have some parts for a regular KR2 that I don't need.  Parts > include a turtle deck, forward deck, and some other items.  Free to > someone who will pick them up. > > > Where do you live? -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life

KR> test

2009-10-25 Thread Eric Pitts
Just me again. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, body thoroughly used up, totally

KR> Test

2009-10-10 Thread Eric Pitts
Not getting anything from the KRnet. Not getting my messages back either. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sid

KR> you

2009-10-08 Thread Eric Pitts
-- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, body thoroughly used up, totally wor

KR> N1852Z returns to the air

2009-10-07 Thread Eric Pitts
Rob glad you are back safe and sound. Missed you at the camp fire, see you round. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to

KR> KR Help near PDX

2009-10-07 Thread Eric Pitts
> > have just added more pics > http://www.facebook.com/album.php?aid=1277=10356717873=820eec4eaf Your pic's come up to small for my eyes to see! -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intenti

KR> Food at the Gathering Thursday night

2009-09-15 Thread Eric Pitts
> Larry Flesner > I will be getting there Thursday around 1300 and will bring a grill, can you say brats and root beer for diner. Will buy several packs and buns and a case or two of Amber bock -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT b

KR> Vertical Avionics

2009-09-12 Thread Eric Pitts
getting no results trying to search > the internet using that name"Vertical Avionics". > > Is this it http://www.verticalavionics.com/ at one time he was on the KR list. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey t

KR> Wiring diagram for King KT76 transponder wanted

2009-09-03 Thread Eric Pitts
> I am looking for a wiring diagram for a King KT76 transponder. > > Try this link http://www.aeroelectric.com/Installation_Data/KT76-78.pdf -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of a

KR> ICOM IC-A200

2009-08-08 Thread Eric Pitts
>Try this link http://www.aeroelectric.com/Installation_Data/Icom_A200-210_Wiring_D.pdf -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather

KR> KRs at OSH

2009-07-24 Thread Eric Pitts
> Testing > > See N64KR at http://KRBuilder.org - Then click on the pics  > See you at the 2009 - KR Gathering in Mt. Vernon, Ill > There is a time for building and a time for FLYING and the time for > Flying has begun. > Daniel R. Heath - Lexington, SC > You passed --

KR> How many Kr's are running subaru's?

2009-07-07 Thread Eric Pitts
//home.hiwaay.net/~langford/klesterp.html EA 81 & airconditioned > They all worked for me. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, bu

KR> N4DD has a hanger

2009-06-30 Thread Eric Pitts
t; > > > I want to be ready for the 09' Gathering. > Good luck in your flying, I want to see you flying old blue!!! -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and

Mark - Re: KR> I Need Some Advice From Flying KR'ers

2009-05-31 Thread Eric Pitts
> Mark, > > Check your link:  http://www.krnet.com/ > > Appears to be taken over by the Chinese at the moment. > > Toad You mite try www.krnet.org the real page -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to th

KR> Jet Engine for KR

2009-04-30 Thread Eric Pitts
> I came across an article in the yet2.com Technology Marketplace Report > for a small jet engine invention advertised to be suitable for light > sport, ultralight and experimental aircraft applications. One could build your own ME-262 -- Eric Pitts Terre Haute

KR> Shop size

2009-04-05 Thread Eric Pitts
> I'm getting ready to build a shop and was wondering how much room do I > need to build a KR2? My current plans are for 16x20. > > Thank You > John > You will find the bigger the shop the more crap you put in it. That,s why I have two and both are full of it. -- Eric Pit

KR> It's Alive Again

2009-03-26 Thread Eric Pitts
> Yes, N886MJ came to life again today at exactly 4:01 PM. There were no > problems with the re-birth of my Corvair engine. Well done Jones -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arri

KR> Nice to talk to someone at my stage of the game

2009-01-27 Thread Eric Pitts
>> > -Kurt > 40+ hours and counting. Where are you located? -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in si

KR> 6061 T-Bar

2009-01-18 Thread Eric Pitts
om/zcSite/Transtar/public/dimension_search.html?shape_id=26 -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, choc

KR> Certification

2009-01-16 Thread Eric Pitts
d to congratulate you on this mile stone, well done. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one han

KR> progress?

2008-12-07 Thread Eric Pitts
t to bed any fears I had about glass work. How ever my new job has keep me very busy, but that may change with a move within the company. Temps here today were 11 deg this mourning. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net

KR> test

2008-12-05 Thread Eric Pitts
Test -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net

KR> camera strobes

2008-10-27 Thread Eric Pitts
Try this link for strobes http://www.florapse.com/Merchant2/merchant.mvc?Screen=PROD_Code=STARSK244P1_Code=STROBEKIT_Count=4 -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net

KR> N886MJ Flies Again!

2008-10-13 Thread Eric Pitts
> Here ya go: http://www.flykr2s.com/photo.html > > Mark Jones (N886MJ) Looks good, sure hope it proves to a viable 5th bearing setup. -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net

KR> N886MJ Flies Again!

2008-10-12 Thread Eric Pitts
> After almost two full months since my crank breakage, "Six Mike Juliet" > flew again this morning with the new Dan Weseman fifth bearing > installed. Mark, where are the pix's of your engine and great job! -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net

KR> Triaxle sees the Sun

2008-10-12 Thread Eric Pitts
Well the triaxle made it's way out of the garage for the first time today. Take a look at HTTP://eric.pitts.mystarband.net/indexk.html Eric Pitts Terre Haute, Indiana KR2S eric.pi...@starband.net

KR> Triaxle sees the Sun

2008-10-12 Thread Eric Pitts
Now Lee you are not trying to stir things up are you? > GREAT looking engine mount, where did you get it and how long did it > take to make???? -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net

KR> AIRPLANE QUESTION

2008-10-12 Thread Eric Pitts
What about the NUTs part? Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net > Sorry I had a brain fart P-82 > http://www.daveswarbirds.com/usplanes/american.htm i answered my own > question > > Lee > > >--

KR> Wing tanks via PVC

2008-10-12 Thread Eric Pitts
You netters who are thinking about using pipe for wing tanks mite check out this link on how it is done. http://www.awesometrvl.com/kr2_fuel_system.htm -- Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net

KR> Elevator travel

2008-10-12 Thread Eric Pitts
I believe the notch or cut you maybe referring to is where no foam is mounted on the spar for the rudder travel left to right. The spar its self is not cut. I will take a photo of mine and send it to you offline. Eric Pitts Terre Haute, Indiana KR2S eric.pi...@starband.net - Original

KR> 35 for 35th

2008-10-12 Thread Eric Pitts
I just registered. Eric Pitts Terre Haute, Indiana KR2S eric.pi...@starband.net - Original Message - From: "Mark Jones" <flyk...@wi.rr.com> To: "KRnet" <kr...@mylist.net> Sent: Wednesday, April 18, 2007 6:16 PM Subject: KR> 35 for 35th >I guess

KR> Hello

2008-10-12 Thread Eric Pitts
I got it Eric Pitts Terre Haute, Indiana KR2S eric.pi...@starband.net - Original Message - From: "Mark Jones" <flyk...@wi.rr.com> To: "KRnet" <kr...@mylist.net> Sent: Wednesday, April 25, 2007 6:08 PM Subject: KR> Hello > Test, is anyone getting

KR> Test of new KR Fix mail sys

2008-10-12 Thread Eric Pitts
down load speed. As far as work on my KR it has been slow, winter cold and work both have been messing up my hobbies. Eric Pitts Terre Haute, Indiana KR2S eric.pi...@starband.net

KR> Update

2008-10-12 Thread Eric Pitts
I have been on vacation this pass week and have managed to get some work done on the airplane. Check out my updated WEB page, the link is in my signature. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/

KR> Re: KRnet Digest, Vol 348, Issue 567

2008-10-12 Thread Eric Pitts
I am in Terre Haute Indiana, there is another in Covington, and one in Eminence between TH and Indy. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/ - Original Message - From: "max monce" <maxmo...@yahoo.com> To: <kr...@mylist.net> Sent: Saturda

KR> EAA SPORT AVIATION

2008-10-12 Thread Eric Pitts
Great job Mark, your site is the bible we build by. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/ - Original Message - > Larry, I'm going to need another one of those KR hats, but make this one > L... > > Mark Langford, Harvest, AL > see hom

KR> turbos

2008-10-12 Thread Eric Pitts
because the chance of gas pooling in the cooler. How ever your mileage may very. The diesel engine in my truck has 17:1 compression and will produce 36 lbs of boost, but it is built for it. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/ - Original Message - From: "

KR> Home again

2008-10-12 Thread Eric Pitts
to make some progress on both planes. It was nice being able to bounce ideas off some one before you went ahead and screwed up. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/

KR> WEB update

2008-10-12 Thread Eric Pitts
http://home.att.net/~e.j.pitts/ Here you go Joe Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/ - Original Message - From: "Joseph H Horton" <joe.kr2s.buil...@juno.com> To: <kr...@mylist.net> Sent: Monday, January 30, 2006 8:12 PM Subje

KR> buying KR plans or any parts

2008-10-12 Thread Eric Pitts
I would happy if it only took a month to get what you ordered, from any supplier. I have been waiting for parts I ordered back in Oct of 05 and I already paid for them. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/

KR> WEB page

2008-10-12 Thread Eric Pitts
Just added a new page covering the Dual control sticks. Let me know if it does not work. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/

KR> WEB page

2008-10-12 Thread Eric Pitts
I just need to weld it up and then fit in the plane and it should be done. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/ - Original Message - From: "Dan Heath" <da...@alltel.net> To: <kr...@mylist.net> Sent: Monday, December 26, 2005 5:50 P

KR> KR2S & Corvair Big Boy Motor For Sale

2008-10-12 Thread Eric Pitts
Did not see the boat pic's yet. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/ - Original Message - From: "Mark Jones" <flyk...@wi.rr.com> To: "KRnet" <kr...@mylist.net> Sent: Friday, December 16, 2005 8:48 PM Subject: Re: KR> KR

KR> Updates

2008-10-12 Thread Eric Pitts
Have added a few updates to my web site, hope you enjoy. Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/

KR> Test Disregard

2008-10-12 Thread Eric Pitts
Test Disregard Eric Pitts Terre Haute Indiana KR2S http://home.att.net/~e.j.pitts/