KR> Test

Test Sent from my MOTOROLA ATRIX? 2 on AT

KR> Fwd: Re: Something wrong with KRNET

I got all three Sent from my MOTOROLA ATRIX? 2 on AT -Original message- From: Glenn Martin To: KRnet , KRnet , KRnet Sent: Sat, Jan 7, 2012 14:26:20 GMT+00:00 Subject: KR> Fwd: Re: Something wrong with

KR> remove me from KR net please

Only you can leave the KR net,just look at the bottom of this message on how to leave. Sent from my MOTOROLA ATRIX? 2 on AT -Original message- From: Alan Wray To: kr net use this one , krnet , KR Forum I

KR> new 'Position and hold' phraseology

Subject: new 'Position and hold' phraseology Beginning September 30, 2010, the words "Line Up and Wait" will replace the words "Position and Hold" to instruct a pilot to enter the runway to await take-off clearance. The FAA Office of Runway Safety seeks your assistance in spreading the message

KR> stainless exhaust parts

> > > Hi Everyone, > >   Anyone out there know of a good supplier of stainless steel exhaust > pipe? > >    Robert Pesak Try this site http://www.burnsstainless.com/ Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of

KR> gathering camping

Dana, does the air port have trailer hookups for elec? And do they allow root beer on site? Eric Pitts Terre Haute Ind. http://eric.pitts.mystarband.net "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid

KR> Gathering-Mt.vernon airport

Very nice Larry, give Chris our best and we will see you in Sept. Eric Pitts > > > > Chris Collins, airport manager of the Mt.Vernon airport, asked me to > pass along the following to the KR family, especially those that plan to > attend the Gathering in September. > > Chris has put in many

KR> Elevator travel

The plans I am looking at dated May 1986 Page 71 30deg up and 20 deg down. Eric > Rich > > Thanks for the info. I must have a very old plans book which doesn't > correspond to yours. > > drjay > > Rich Seifert wrote: > Hi dr jay > Elevator travel is up 30 degrees

KR> Elevator travel

. That leaves not enough room to bolt the > arm hinge together, but if the picture is correct then I need to make a > cutout of suficient depth to line up the fitting holes. Am I right or > just wishful thinking? > > drjay > > > - Original Message > From: &qu

KR> Nose strut

I now have the nose gear bracket welded to my engine mount. I have an idea in my head how to go about it but need to ask just incase. How did you trigear folks set the nose strut for drilling? Eric Pitts KR2S eric.pitts.mystarband.net

KR> Nose strut

gt; Visit my web site: www.flykr2s.com > E-mail: flyk...@wi.rr.com > - Original Message - > From: <eric.pi...@starband.net> > To: <kr...@mylist.net> > Sent: Friday, May 18, 2007 5:59 PM > Subject: KR> Nose strut > > >>I now have the nose gear brac

KR> Engine mount

After talking with my welder about my engine mount. He stated that I should drill some small holes in the welded tubing at the low spots to let condensation drain out. I told him that Willie Wonka had charged the tubing with gas as he welded the mount up. He said it did not matter as the mount

KR> A time to build

Well after 28 years of service with the Indiana Air National Guard, it only took 10 minutes to sign the papers to end that career. On August 30th I well end 28+ years service with the US Air force. This is of my own accord. I will then start full time building on the KR for at least one year. I