I just ordered a stainless steel nut in the correct size from McMaster
Carr, ground the correct radius on the bottom to match the exhaust pipe,
and welded it on.
Original Message
Subject: Re: KR> Cyberdyne mixture meter
From: Mark Langford via KRnet
I don't have one h
John Bouyea wrote:
> Can you tell us about which exhaust bung you welded into the
manifold? I'm
> wondering what size to order as I took the plunge like Chris...
I don't have one here to measure, but I'm pretty sure that Bosch sensor
requires a standard 18mm x 1.5mm bung, as shown at
Hi Mark.
Can you tell us about which exhaust bung you welded into the manifold? I'm
wondering what size to order as I took the plunge like Chris...
John Bouyea
N5391M/ KR2
OR81/ Hillsboro, OR
2015 KR at MMV Gathering CoHost
... Bosch part number is 11027. More on this is at
shield in the exhaust manifolds
of the later model I4 8V motors.
Wayne DeLisle Sr.
oldmoparguy at carolina dot rr dot com
-- > KR> Cyberdyne mixture meter
>
> Mark Langford ml at n56ml.com
> Sun Jul 31 14:56:35 EDT 2016
>
> Wide band units and there sensors are very expens
Thanks Brian, I decided to order the Intellimeter (Cyberdyne) meter as per the
comments earlier.
Regards
Chris Gardiner
Sent from my iPad
> On Jul 31, 2016, at 7:07 PM, brian.kraut--- via KRnet list.krnet.org> wrote:
>
> I had one in my KR from Westach. It was a 2 1/4 analog meter and worked
orate a mixture meter in one of their quad gauges with I think it
was CHT, EGT, and I can't remember the other one. They are very good
about making custom gauges for low cost if you call and ask.
Original Message
Subject: KR> Cyberdyne mixture meter
From: Chris Gard
Thanks Mark and all.
I?ll go ahead and place the order now.
Regards
Chris Gardiner
Sent from Mail for Windows 10
So if you are only going to monitor one exhaust tube which cyl should that be?
Or does it even matter?
Craig
> On July 31, 2016 at 2:56 PM Mark Langford via KRnet
> wrote:
>
>
> Chris Gardiner wrote:
>
> > I notice this meter recommends using a narrow band O2 sensor instead
> of the
Thanks Chris.
I notice this meter recommends using a narrow band O2 sensor instead of the
wide band type I was planning for.
What O2 sensor are you planning to use?
Thanks
Chris Gardiner
Sent from Mail for Windows 10
https://m.summitracing.com/parts/izl-ms7008
Chris Pryce
Burlington, NJ
Chris Gardiner wrote:
> I notice this meter recommends using a narrow band O2 sensor instead
of the wide band type I was planning for.
>
> What O2 sensor are you planning to use?
This question was not directed at me, but I do have an opinion. An
inexpensive ($20) narrow-band Bosch
I am planning to install an O2 sensor and mixture meter as per Sid Woods
presentation from a few years ago that I found on the KR net archives.
Seems that the recommended Cyberdyne mixture meter ( 280-7009) has been
discontinued?
Not on JEGS web site or auto performance sites.
Does anyone
Yep, I did what Mark suggests. I purchased the narrow band Bosch sensor
from summit. It's $18.
Chris
On Jul 31, 2016 14:57, "Mark Langford via KRnet"
wrote:
>
> Chris Gardiner wrote:
>
> > I notice this meter recommends using a narrow band O2 sensor instead of
the wide band type I was planning
Here's a link to what I bought recently:
https://m.summitracing.com/parts/izl-ms7008
Chris Pryce
Burlington, NJ
14 matches
Mail list logo
