Thanks for the help guys, the joints are complete which means I can move
forward
this afternoon.
BTW, I just finished setting up a site to document the build at
http://n394ja.com/
I look forward to any questions or comments!
<>
<>
As long as you observe proper scarfing techniques (12:1 ratio I think),
there should be no deficit in strength, so placement shouldn't be an
issue.
Steve
<>
-Original Message-
From: sean duggan
To: kr...@mylist.net
Sent: Sat, Mar 5, 2011 12:32 pm
Subject: KR> Longeron Splices
r how the rest of the build will go, lol
Regards,
Sean
From: Patrick and Robin Russo
To: KRnet
Sent: Sat, March 5, 2011 2:54:21 PM
Subject: Re: KR> Longeron Splices
Sean
I am imagining a scarf about 7 inches long (11-12 times 5/8"). That will
serve
uggan"
To:
Sent: Saturday, March 05, 2011 1:32 PM
Subject: KR> Longeron Splices
> Hey Neters,
>
> I received my wood in good condition from wicks last week. Since then, I
> have
> been preparing to build the fuselage sides. This morning I started laying
> out my
>
Hey Neters,
I received my wood in good condition from wicks last week. Since then, I have
been preparing to build the fuselage sides. This morning I started laying out
my
jig board for the sides. After placing the top 5/8X5/8" longeron on the table,
I
immediately noticed that it was too short
5 matches
Mail list logo