I have a tailwheel configuration with the "Grove" main gear legs and no
wheel covers. The brake line follows the rear edge of leg and is glassed
in. Does anyone have any recommendations for jacking plane enough to remove
a main wheel? Is there a clamp-type tool usable around the brake line?
>Does anyone have any recommendations for jacking plane enough to remove
>a main wheel? Is there a clamp-type tool usable around the brake line? I
>don't want to muscle it up on a foam pillow.
>Pep Boys is selling an ATV hydraulic jack for $49.95 (sale) with a large
>rubber covered lift tabl
Weldon,
Made a saw horse just tight under the firewall. Put it under the FW and lift
the tail wheel and put something under it. Al
- Original Message -
From: "Carol & Weldon Jennings"
To: "KRnet"
Sent: Wednesday, August 24, 2005 1:38 PM
Subject: KR> Main
>I have a tailwheel configuration with the "Grove" main gear legs and no
>wheel covers. The brake line follows the rear edge of leg and is glassed
>in. Does anyone have any recommendations for jacking plane enough to remove
>a main wheel? Is there a clamp-type tool usable around the brake lin
At 03:09 PM 8/24/2005 -0800, you wrote:
>Weldon,
>Made a saw horse just tight under the firewall. Put it under the FW and lift
>the tail wheel and put something under it. Al
Better put another one under the wing that has the wheel off.
Larry Severson
Fountain Valley, CA 92708
(714) 968-9852
lar
Lift the tail so the plane is around level, put a board under each main wing
stub spar with a jack under the boards, and jack away. To make it safer, use
a short strong saw horse and lower the wing onto the saw horse under each
wing and remove the jacks until finished. With the engine on, it may wa
t [mailto:krnet-boun...@mylist.net]On
Behalf Of larry flesner
Sent: Wednesday, August 24, 2005 6:08 PM
To: KRnet
Subject: Re: KR> Main gear jack info
>I have a tailwheel configuration with the "Grove" main gear legs and no
>wheel covers. The brake line follows the rear edge of leg an
esday, August 24, 2005 5:38 PM
Subject: KR> Main gear jack info
>I have a tailwheel configuration with the "Grove" main gear legs and no
> wheel covers. The brake line follows the rear edge of leg and is glassed
> in. Does anyone have any recommendations for jacking plane e
net
2005-08-25 05:36
Veuillez répondre à KRnet
Remis le : 2005-08-25 05:36
Pour : "KRnet"
cc :(ccc : Serge VIDAL/DNSA/SAGEM)
Objet : RE: KR> Main gear jack info
I had to jack my Mustang about a month ago to change the axles and I used
this method. I u
; Envoyé par : krnet-boun...@mylist.net
> 2005-08-25 05:36
> Veuillez répondre à KRnet
> Remis le : 2005-08-25 05:36
>
>
> Pour : "KRnet"
> cc :(ccc : Serge VIDAL/DNSA/SAGEM)
> Objet : RE: KR> Main gear jack info
>
>
&
08-27 13:38
Pour : KRnet
cc :(ccc : Serge VIDAL/DNSA/SAGEM)
Objet : Re: Réf. : RE: KR> Main gear jack info
Being new to this forum, I hesitate to speak
outbut all the Eyebolt hardware I have ever seen
hasn't been SAE rated and was weak. Is this a
11 matches
Mail list logo
