KR> Max Fuel Flow Test

2012-01-01 Thread Prototype Mech
flow rate at 17 gallons per hour.  More than enough for a 2100cc revmaster. Cheers, Dave From: Mark Langford To: KRnet Sent: Sunday, January 1, 2012 6:13 PM Subject: Re: KR> Max Fuel Flow Test Sid Wood wrote: >Question: Has any or everyone else did o

KR> Max Fuel Flow Test

2012-01-01 Thread Mark Langford
Sid Wood wrote: >Question: Has any or everyone else did or had to do this max flow test? Sure. I would hope we've all done it, but not because anybody made me do it...just did it because it was the smart thing to do. Mine was something like 38 gph flow, although the Corvair only needs about 9

KR> Max Fuel Flow Test

2012-01-01 Thread Larry&Sallie Flesner
At 05:28 PM 1/1/2012, you wrote: >Question: Has any or everyone else did or had to do this max flow test? ++ P.S. The flow test is much easier to do in a tail dragger. :-) :-) Larry Flesner

KR> Max Fuel Flow Test

2012-01-01 Thread Larry&Sallie Flesner
At 05:28 PM 1/1/2012, you wrote: >Question: Has any or everyone else did or had to do this max flow test? I was not requested or required to perform the test but I did it on my own. My Facet pumps deliver 30 gallon per hour, 500 pe

KR> Max Fuel Flow Test

2012-01-01 Thread smwood
Here are two pictures for a max fuel flow test to determine if the fuel system can deliver at least 150% fuel flow to the engine during worst case conditions of 14 degrees angle of attack, full throttle and minimum fuel in the operating tank. My FAA inspector mandated criteria is to bleed off 5