At 01:45 PM 4/8/2014, you wrote:
>Still looking for a flex shaft that does not have the torsional windup.
>+++
How about the "outside sheath" on something like a lawn mower throttle cable?
Larry Flesner
Subject: Re: KR> Mixture
control on Zenith carb
I wrapped Teflon tape around the needle screw for packing. The screw
threads turn easily in the Teflon and no leaks. I tried O-rings around the
needle
That is what I used. I pulled the center flex thingy out of the Dremmel
flex shaft and ran it inside a piece of nylaflow tube that was inside a
piece of aluminum tube.
Original Message
Subject: Re: KR> Mixture control on Zenith carb
From: Paul Visk
List-Post: kr
I wrapped Teflon tape around the needle screw for packing. The screw
threads turn easily in the Teflon and no leaks. I tried O-rings around the
needle shaft, but had to tighten the gland nut to prevents leaks; then the
shaft was too tight to easily turn with the cockpit control. I used a
Original Message
Subject: Re: KR> Mixture control on Zenith carb
From: "schmleff ." <[1]schmleff at gmail.com>
Date: Tue, April 08, 2014 12:00 am
To: KRnet <[2]krnet at list.krnet.org>
That was me. It was the rack and pinion th
That was me. It was the rack and pinion thing that I was interested
in. What did you use for the rack and pinion parts? Were they off the
shelf or custom? I need to make something similar for my Mikuni SBN.
Jeff Lange
On 4/7/14, brian.kraut at eamanufacturing.com
wrote:
>
> A few people asked
A few people asked about how I did the mixture control on my Zenith carb
a few months ago. Now that someone posted about the great Wayback
machine internet archive I can share the pictures of how I did it from
my long ago down KR pagy on my website. Here they are:
7 matches
Mail list logo
