Van: krnet-bounces+stefkr2=kpnmail...@mylist.net namens Mark Jones
Verzonden: ma 23-5-2011 23:25
Aan: KR Net
Onderwerp: KR> Wheel Pant Mounting Brackets
Once again I have broken a wheel pant mounting bracket. This makes at least ten
times they have broken and each time I am paying aro
>Once again I have broken a wheel pant mounting bracket. This makes at least
ten times they have broken and each time I am paying around 10 dollars to
get them welded back together. They are made from 6061T6 aluminum.
Hi Mark
6061T6 means 6061 has been strengthened by tempering to T6 condition,
Mark,You may not have ever noticed but I do not have any bracket. The inside
portion of my wheel pant was glassed in place wrapping the gear leg to form the
fairing in one piece. This is caulked to the gear leg and can be cut loose to
slide up if I need to. The wheel pant is cut out on the insid
Mark Jones wrote:
>what are your brackets made from and how are they holding up?
I'm not sure if you're talking about nose wheel (which I don't have) or main
gear, but mine are 6061-T6 and I've never had a problem with them. Mine are
shown near the bottom of http://www.n56ml.com/kgear.html .
Once again I have broken a wheel pant mounting bracket. This makes at least ten
times they have broken and each time I am paying around 10 dollars to get them
welded back together. They are made from 6061T6 aluminum. When I made them I
simply bent them to shape but eventually they started breaki
Once again I have broken a wheel pant mounting bracket. This makes at least ten
times they have broken and each time I am paying around 10 dollars to get them
welded back together. They are made from 6061T6 aluminum. When I made them I
simply bent them to shape but eventually they started breaki
6 matches
Mail list logo
