Thanks Guys,
Your remarks shed some light on my situation.
Regards,
Jaco Swanepoel
South Africa
KR2S, ZU-DVP
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Can someone tell me what the length of the counter weight arm is on the
aileron. I cannot seem to find that information within the plans.
Jeff
On Thu, 07 Jul 2005 20:38:37 -0600 "wilder_jeff Wilder"
writes:
>
> Can someone tell me what the length of the counter weight arm is on the
> aileron. I cannot seem to find that information within the plans.
>
> Jeff
As long as you can make it while not binding or
Can you tell me what your counterweight bar is made from?
I have some 2x4x1/4 AL stock that I am trying to figure out if that will
suffice for strength and length.
-Jeff
>From: jscott.pi...@juno.com
>Reply-To: KRnet <kr...@mylist.net>
>To: kr...@mylist.net
>Subject: Re: K
your counterweight bar is made from?
>
> I have some 2x4x1/4 AL stock that I am trying to figure out if that
> will
> suffice for strength and length.
>
> -Jeff
>
> >From: jscott.pi...@juno.com
> >Reply-To: KRnet <kr...@mylist.net>
> >To: kr...@my
Ours are 2 X 4 X 1/8. I believe that is what Jim Faughn had that broke.
That does not mean that they will all break. Your aluminum is 1/4". I
really don't think that will break, but your results will vary.
See you in Mt. Vernon - 2005 - KR Gathering
See N64KR at http://KR-Builder.org - Then
I used two pieces of 1/8" steel angle, bolted onto each other like a double
L and taking the counterweight on one arm and clamping the aileron spar
between them on the other. As long as would fit behind the rear spar.
John
Martindale Family
29 Jane Circuit
Toormina NSW 2452
Australia
ph: 61 2
.
Brian Kraut
Engineering Alternatives, Inc.
www.engalt.com
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Dan Heath
Sent: Friday, July 08, 2005 7:49 PM
To: kr...@mylist.net
Subject: Re: KR> aileron counter weight
Ours are 2 X 4 X 1/8.
8 matches
Mail list logo