Hi everyone, I've searched the archives on the topic of roughing up/preping
joints prior to glueing with T-88. I recieved some input that this practice was
not recommended. I used resin bond sandpaper to roughen the joints.
Any new feelings on this? I glued up a couple of test joints, and pos
At 12:26 PM 3/27/2007, you wrote:
>Hi everyone, I've searched the archives on the topic of roughing
>up/preping joints prior to glueing with T-88.
>Russ
+
I used FPL-16A epoxy for all my wood work. I don't know if T-88 will
age -
From: "Russ Kendall"
To: "KRnet"
Sent: Tuesday, March 27, 2007 11:26 AM
Subject: KR> sanding joints?
> Hi everyone, I've searched the archives on the topic of roughing
> up/preping joints prior to glueing with T-88. I recieved some input that
>
Hi Nick;
I've found that a Dremel tool with the proper shaped cutter tip works well
if your carefull, then finsih off with a sanding block with 60 or 80 grit
paper untill your satisfied.
Regards
Myron (Dan) Freeman
Indpls, Ind. 46203 USA. Home of the
2007 World Champion Indpls, Colt's
mfreem...
Sanding jointsI have been building wooden
airplanes for over 40 years and using epoxy, including
T88 for the last 30 and since begining the epoxy I
have never sanded a joint. My joints are usually
planed now but for years used a planer blade in my
saw. Both with excellent results. I would sugge
Sanding lets dust build up in the pores of the wood and
lessens glue penetration, Virg
On Tue, 27 Mar 2007 10:26:51 -0800 "Russ Kendall"
writes:
> Hi everyone, I've searched the archives on the topic of roughing
> up/preping joints prior to glueing with T-88. I recieved some input
> th
Most of us seem to accept this as gospel, but it seems to me that what
little sanding "dust" is present, after brushing it off or vacuuming, should
easily be soaked up by the T-88 and the resultant mixture would then be
similar to a very light form of flox which is considered to be structural.
Does
I don't think you will find technical data from glue manufacturers that
recommends "roughing up" a surface to be glued. A smooth freshly planed or
sawn surface is best. Roughing increases the thickness of the glue line and
that is generally not a good idea. Lightly scuffing plywood with sandp
@itaroca.com.br
--
- Original Message -
From: "Ed Janssen"
To: "KRnet"
Sent: Tuesday, March 27, 2007 11:50 PM
Subject: Re: KR> sanding joints?
> Most of us seem
9 matches
Mail list logo
