Isn't this specified on the plans ? Virg
On 2/12/2015 10:19 AM, dean choitz via KRnet wrote:
> What bolts do you use to fasten wing attach fittings to each other an3-5a
> on tear and an6-7a or an6-6a only my guess
> ___
> Search the KRnet Arc
What bolts do you use to fasten wing attach fittings to each other an3-5a
on tear and an6-7a or an6-6a only my guess
Netters,
Does anybody know the size and lenths of the wing bolts? I have standard
WAF's. I have to make an order for A/S and the plane is at the airport now.
Lee Van Dyke
Mesa AZ
l...@vandyke5.com
>Does anybody know the size and lengths of the wing bolts? I have standard
>WAF's. >I have to make an order for A/S and the plane is at the airport
>now.
All of the forward spar WAF to WAF bolts (8) are AN6-5A.
All of the aft spar WAF to WAF bolts (8) are AN3-5A.
The forward center section spar
VIDAL
KR2 ZS-WEC
Paris, France
"Allen Wiesner "
Envoyé par : krnet-boun...@mylist.net
2005-01-05 07:49
Veuillez répondre à KRnet
Remis le : 2005-01-05 07:50
Pour : "KRnet"
cc :(ccc : Serge VIDAL/DNSA/SAGEM)
Objet : Re: KR> wing bolts
Unless you build a complicated spacer arrangment, you will be needing
8 bolts per side. 4EA AN6 (FWD SPAR), and 4EA AN3 (Rear spar).
I think there are some serious structural concerns with a 4 bolt approach,
but that was an old thread.
For initial alignment, I have some AN3 bolts ground down to
There was a very long discussion on this subject about a year ago and the
vote appeared to be split. I used 8 per side on the Little Beast and intend
to do the same on this one.
See N64KR at http://KR-Builder.org - Then click on the pics
Daniel R. Heath - Columbia, SC
da...@kr-builder.org
See
Go with the 8 bolts per side, If u go with a spacer and 1 bolt fails u
are really loosing the srtength of 2 bolts at 2 seperate attach points.
On Tue, 24 Feb 2004 21:26:57 -0700 "Lee" writes:
> Netters this will not be my last question for you tonight. This one
> goes out to guys and gals tha
What is the best way to bolt the wings on 4 bolts on each side or 8 small
ones per side??
--
Lee,
Under Australian Standards, the Single bolt on each WAF is required.
Phillip Matheson
mathe...@dodo.com.au
Australia
VH PKR
See our engines and kits at.
htt
Netters this will not be my last question for you tonight. This one goes out
to guys and gals that have flying KR's. What is the best way to bolt the wings
on 4 bolts on each side or 8 small ones per side??
Lee Van Dyke
Mesa AZ
N783JB
l...@vandyke5.com
http://vandyke5.com/kr2.htm
Happy New Year group,
What is the best configuation for the wing bolts??? The plane that I am
re-doing appears to have used 16 different nuts and bolts to attach the wings.
What is the easiest and best configuation to use???
Lee Van Dyke
Mesa AZ
l...@vandyke5.com
Lee Van Dyke wrote:
>> What is the best configuation for the wing bolts??? The plane that I am
re-doing appears to have used 16 different nuts and bolts to attach the
wings. What is the easiest and best configuation to use???<<
Another way to do it is to use one long bolt in the place of the tw
Is the spacer welded in so you don't lose it when you pull the bolts?
Pat Driscoll
patric...@usfamily.net
Saint Paul, MN
-- http://USFamily.Net/info - Unlimited Internet - From $8.99/mo! --
No, but we have chosen to use individual bolts.
See N64KR at http://KR-Builder.org - Then click on the pics
Daniel R. Heath - Columbia, SC
da...@kr-builder.org
See you in Mt. Vernon - 2004 - KR Gathering
See our EAA Chapter 242 at http://EAA242.org
14 matches
Mail list logo
