On Fri, 29 Nov 2002 20:23:09 -0800 David Boreham [EMAIL PROTECTED]
wrote:
Where can i find the tarball of iproute2 with HTB support?
I know that i can download the patch and the binary tc but i want to
install
iproute2 with rpm.As a result i want the tarball or the src.rpm if
On Friday, 29 November 2002, at 13:54:17 -,
Shane Purtill wrote:
The question is that if my http traffic goes through squid then when it
is seen by the Linux Traffic Controller (the TC is on the outgoing
Interface i.e. the Internet connection, so that it can see the actual
bandwidth usage
Hi there
I just had a data line installed between my home and the office. I've
managed to connect the two sides successfully with ppp and the gateways
on both sides can see each other. I want the hosts behind the
gateways to see each other as well and although this is discussed in
some howtos I
Hi Roch?!
I just had a data line installed between my home and the office. I've
managed to connect the two sides successfully with ppp and the gateways
on both sides can see each other. I want the hosts behind the
gateways to see each other as well and although this is discussed in
some
On Sat, 30 Nov 2002 13:53:57 +0200
Abraham van der Merwe [EMAIL PROTECTED] wrote:
Thanks for the advice :-)
You don't need to add a route to get to 192.168.1.0/24 since you your
default gw will route packets to that network anyway. You are also use
192.168.1.10 as a gateway to get onto the
hi, all
i run the following scripts :
tc qdisc add dev eth0 handle : ingress
tc filter add dev eth0 parent : protocol ip \
pref 4 u32 match ip dst 10.0.0.1 flowid :1
my question is :
can i know how many packets are matched by
this filter?
if i can , what should i do to get this
