That sounds like an overly complicated way to do it. I would just
create a 512kbit class with subclasses for the internet traffic, and
route all MAN traffic into a 100mbit class. Should be some way to know
which ip's will go to the MAN. Creating a virtual interface makes little
sense here, si
Hi there...
I have an idea for you, just don't ask me how to implement it.
1. bring up some virtual interface, I'm almost sure linux has some way of
doing it. this interface should output data to your real interface.
2. try to route all MAN traffic trough this interface. you'll need to know the
Hello all! I have a small LAN at home and when someone
starts to download (only one), interractive traffic
(www, chat and online games) is impossible with
standard kernel queues setup... So I started to shape.
My ISP gives me a 512 kbits link to the Internet and a
100 Mbits link to some of the othe
Hi,
I'm trying to modify the Wondershaper script so achieve the following.
1. Prioritize traffic to the few IP addresses.
2. Everyone else should get a fair amount of bandwidth
The problem I am facing is when I run this script is that the bandwidth
seems to get halved. I tried to apply this scri
On Sunday 20 June 2004 19:33, Pedro Zorzenon Neto wrote:
> Hi Folks,
>
> It's been 4 days since I posted a question and did not receive any
> answer. Can you give me a hint if linux 'tc' 'iproute2' tools are
> able to do what I need?
>
> I don't even know if they can do this and I should continue t
Hi Folks,
It's been 4 days since I posted a question and did not receive any
answer. Can you give me a hint if linux 'tc' 'iproute2' tools are
able to do what I need?
I don't even know if they can do this and I should continue trying to
use them for my needs. It seems that what I asked is very ha
On Wed, Jun 16, 2004 at 03:12:56PM -0300, Pedro Zorzenon Neto wrote:
> This is the network:
>
> 192.168.1.2 --+
> 192.168.1.3 --+ Router
> 192.168.1.4 --+ Linux/2.4
> 192.168.1.5 --+ eth0 eth1 internetprovider1
> 200.x.x.2 +
> 200.x.x.3 +
> 200.x.x.4 +
Maybe the lin
Hi Folks,
I am a newbie in Qos... I could not find references to my question,
then I am asking.
This is the network:
192.168.1.2 --+
192.168.1.3 --+ Router
192.168.1.4 --+ Linux/2.4
192.168.1.5 --+ eth0 eth1 internetprovider1
200.x.x.2 +
200.x.x.3 +
200.x.x.4 +
I am using squid with pam_auth and delay pools to control the banwidth to
the inet access.
The problem, of course, is that 80% of the bandwidth is wasted.
So the idea is to make the same rules but with HTB or IMQ.
I did it by mac-address but the problem is that the users move from a side
to another
On Thursday 30 October 2003 15:34, Ryan Vilim wrote:
> Oh, I am sorry I probably should have specified the setup of my network
> (stupid mistake by me :p). I have a server (linux) a laptop (linux) and
> my parents computer (windows). These are all connected to the internet
> via my router which is
On Thu, 2003-10-30 at 05:32, Stef Coene wrote:
> On Wednesday 29 October 2003 22:35, Ryan Vilim wrote:
> > It seems I have quite a difficult (for me) bandwidth shaping problem.
> > What I want is this;
> >
> > Port 80 and port 21 will share 30 kilobytes of the 50kilobytes upstream
> > my ISP gives
On Wednesday 29 October 2003 22:35, Ryan Vilim wrote:
> It seems I have quite a difficult (for me) bandwidth shaping problem.
> What I want is this;
>
> Port 80 and port 21 will share 30 kilobytes of the 50kilobytes upstream
> my ISP gives me, bittorrent will get 10 maximum (ports 6881-6890), and
>
It seems I have quite a difficult (for me) bandwidth shaping problem.
What I want is this;
Port 80 and port 21 will share 30 kilobytes of the 50kilobytes upstream
my ISP gives me, bittorrent will get 10 maximum (ports 6881-6890), and
all other ports get the full 100 mbits.
I want any of the oth
On Saturday 23 August 2003 18:55, Gustaf wrote:
> I have just read trough the HOWTO but its soo large.
> I wonder if anyone have some simple examples of making everyone on my
> lan to share the bandwidth equally.
>
> So if I'm the only one using the connection I get all the bandwidth but
> if someo
I have just read trough the HOWTO but its soo large.
I wonder if anyone have some simple examples of making everyone on my
lan to share the bandwidth equally.
So if I'm the only one using the connection I get all the bandwidth but
if someone else starts using the connection he gets half and so on.
Madhuri,
: > For download, you
: > can use 3 links but only if you NAT and you have a lot of
: > connections so you can load balance the different connections (like
: > http traffic).
:
: Can you provide some pointers on how to do this, especially load balancing?
Try the nano HOWTO, posted
Hi,
Thanks for the response.
> For download, you
> can use 3 links but only if you NAT and you have a lot of connections so you
> can load balance the different connections (like http traffic).
Can you provide some pointers on how to do this, especially load balancing?
Thanks,
Madhuri
> A
On Saturday 26 July 2003 11:39, madhuri wrote:
> Hi,
>
> We have three WAN links each of capacity 2 Mbps.
>
> There is a one linux box per link which is used for NAT and firewall. So
> I have three linux boxes and three WAN links to talk to the internet.
>
> We want to do bandwidth shaping over the
fault
routes with weights? Or do we have to do this explicitly with ppp-up?
Mohan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of hare ram
Sent: Saturday, July 26, 2003 4:54 PM
To: Madhuri Patwardhan
Cc: [EMAIL PROTECTED]
Subject: Re: [LARTC] bandwidth shaping
day, July 26, 2003 4:12 PM
Subject: Re: [LARTC] bandwidth shaping over multiple WAN links
>
>
> We are using redhat 8.0, however we can switch to redhat 9.0 if required.
>
> So you have one linux box with multiple ethernet cards each connected to a
> seperate WAN link and you are
ion what distro are you using
>
> iam using redhat 9.0, with multiple links working fine
>
>
> best of luck
>
> hare
>
> - Original Message -
> From: "madhuri" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, July 26, 2003
-
From: "madhuri" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, July 26, 2003 3:09 PM
Subject: [LARTC] bandwidth shaping over multiple WAN links
>
> Hi,
>
> We have three WAN links each of capacity 2 Mbps.
>
> There is a one linu
Hi,
We have three WAN links each of capacity 2 Mbps.
There is a one linux box per link which is used for NAT and firewall. So
I have three linux boxes and three WAN links to talk to the internet.
We want to do bandwidth shaping over these three links. I know
individually we can do bandwidth sha
On Friday 04 April 2003 02:46, [EMAIL PROTECTED] wrote:
> I own a WIreless ISP and have recently began suppling bandwidth to college
> dorms. As I expected, 90% of the bandwidth they consume is downloading
> music with programs such as Kazaa. I would like to throttle this
> bandwidth, only as nee
I own a WIreless ISP and have recently began suppling bandwidth to college
dorms. As I expected, 90% of the bandwidth they consume is downloading music
with programs such as Kazaa. I would like to throttle this bandwidth, only as
needed. As long as extra, unused bandwidth was present, the mus
25 matches
Mail list logo
