Hi all, I have been attempting to get to know the basics of CBQ. Having followed the example at http://lartc.org/HOWTO//cvs/2.4routing/lartc.html in Section 9.5.4.4, I find myself somewhat baffled.
I have checked & double-checked the commands entered and they conform to the above (though my bandwidth limits are different). What I fail to see, using `tc -s class show dev eth0 && tc -s qdisc show`, is any filtering being performed: [root@gw rc.d]# tc -s class show dev eth0 && tc -s qdisc show class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit Sent 253851 bytes 3784 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 class cbq 1:1 parent 1: rate 40Kbit (bounded) prio no-transmit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 4.52356e+06 undertime 0 class cbq 1:3 parent 1:1 leaf 30: rate 30Kbit prio 5 Sent 0 bytes 0 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 6.03733e+06 undertime 0 class cbq 1:4 parent 1:1 leaf 40: rate 3Kbit prio 5 Sent 0 bytes 0 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 6.0533e+07 undertime 0 qdisc sfq 40: dev eth0 quantum 1514b Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc sfq 30: dev eth0 quantum 1514b Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc cbq 1: dev eth0 rate 10Mbit (bounded,isolated) prio no-transmit Sent 253851 bytes 3784 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 Using `tc filter show dev eth0`, I get the following: filter parent 1: protocol ip pref 1 u32 filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:3 match 00500000/ffff0000 at 20 filter parent 1: protocol ip pref 1 u32 fh 800::801 order 2049 key ht 800 bkt 0 flowid 1:2 match 0a000003/ffffffff at 12 There is one change to the filter rule given in the example: the second filter matches against the ip address 10.0.0.3 (my box). I did this to ensure all my traffic would get matched. Should I be expecting to see something from the stats (it makes sense to me that I should!)? If so, could someone point me in the direction of where I may be going wrong? If not, where should I be looking? To be clear, here are the commands I used: [root@gw rc.d]# tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 10Mbit avpkt 1000 cell 8 [root@gw rc.d]# tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 10Mbit rate 40kbit weight 0.4kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded [root@gw rc.d]# tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 10Mbit rate 30kbit weight 0.3kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 [root@gw rc.d]# tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 10Mbit rate 3kbit weight 0.03kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 [root@gw rc.d]# tc qdisc add dev eth0 parent 1:3 handle 30: sfq [root@gw rc.d]# tc qdisc add dev eth0 parent 1:4 handle 40: sfq [root@gw rc.d]# tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip sport 80 0xffff flowid 1:3 [root@gw rc.d]# tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip src 10.0.0.3 flowid 1:2 Kernel is v2.4.18. Cheers, Pete Mee _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
