On Thu, 2007-06-21 at 23:22 +0200, Christian Benvenuti wrote:
Hi Mark,
Hi,
What exactly are the tokens?
I thought each token allowed the sending of one byte, that tokens are
stored in a bucket that can hold a max of burst tokens, and that this
bucket is filled with tokens at rate.
Hi Mark,
Hi,
What exactly are the tokens?
I thought each token allowed the sending of one byte, that tokens are
stored in a bucket that can hold a max of burst tokens, and that this
bucket is filled with tokens at rate.
But theory does not seem to explain the tc -s .. output in the
examples
: Friday, April 06, 2007 7:29 PM
Subject: [LARTC] Re: Routing Question
Hi Fernando,
Hi, Somebody can help me , i have a linux gateway running ipsec, so if
i ping a host on a remote ipsec network from gateway packet goes out
with external ip address of gateway , is there a way that packets going
from
Hi Fernando,
Hi, Somebody can help me , i have a linux gateway running ipsec, so if
i ping a host on a remote ipsec network from gateway packet goes out
with external ip address of gateway , is there a way that packets going
from gateway to a remote network be sourced from internal gateway ip ?
ah thanks so much!!
Sew
On 4/20/06, Alessandro Ren [EMAIL PROTECTED] wrote:
Yes, edit the script adsl-connect problably in in /sbin and remove
the route del command, better, just comment it out.
I had the same poblem and that solved it.
[]s.
the sew wrote:
Hi THere,
Ok, I have another question for you:
10) Is the 15 kbps rate limit a combination of inbound and outbound traffic or
15 kbps for inbound and 15 kbps for outbound for a total of 30 kbps traffic for
any given client. (Is the 15 kbps full duplex or half duplex?)
Grant. . . .
15 Kbps half duplex
tc qdisc add dev imq0 root handle 1: htb default 2
tc class add dev imq0 parent 1: classid 1:1 htb rate 15kbps
tc qdisc add dev imq0 parent 1:1 handle 10: sfq perturb 10
tc filter add dev imq0 protocol ip parent 10:0 prio 1 u32 match ip src
192.168.1.1/32 flowid 1:1
tc filter
that I apply it IP to each of my network?
Yes, you will want a similar rule for each IP on your network.
tc class add dev imq0 parent 1: classid 1:1 htb rate 15kbps
tc qdisc add dev imq0 parent 1:1 handle 10: sfq perturb 10
tc filter add dev imq0 protocol ip parent 10:0 prio 1 u32 match ip src
Answers...
1)Can we get a simple layout of your network?
WAN-(Red eth1)SMOOTHWALL(Green th0)- Network: 192.168.1.0/24,
Gateway: 192.168.1.250, Broadcast: 192.168.1.255
2) Are you wanting to set a bandwidth limit on how much traffic each
individual computer in your network can send out to the
On Tuesday 23 November 2004 21:08, richard lucassen wrote:
snip
The last sentence makes this clear IMHO. But I can be terribly wrong of
course, so please correct me if I'm still wrong...
I think you are right.
I also know that this is not how htb works because this wil eat cpu cycles.
There
On Tue, 23 Nov 2004 19:56:31 +0100
Stef Coene [EMAIL PROTECTED] wrote:
So a burst of 20k means the next 20kbit waiting in the queue will be
sent in one burst before switching to another queue. This also means
that this block of 20kbit is sent full speed over the line and it is
not limited
what confused me is : since i only add both exact one
filter at both priority 4 and priority 5 respectively,
why the filter list shows that there are two filters
in both priority 4 and priority 5?
It's a bug in the show routine.
Stef
--
[EMAIL PROTECTED]
Using Linux as bandwidth
Once again forgot to reply to the list:
Patrick McHardy wrote:
Ciprian Niculescu wrote:
whitch is the logic in this piaece of code
iptables -t mangle -A PREROUTING -j IMQ
iptables -t mangle -A PREROUTING -s 1.2.3.4 -j MARK --set-mark 1
and in the imq0 i have a class that handle the
13 matches
Mail list logo
