> Earlier Freeswan also required patching of kernel. Recently, however, an
rpm
> was released which makes it easy to install. many users may not have
> installed development libraries to do a recompile. Can someone who is good
> at it create and publish the rpms of kernel, iproute2 and tc patched
please?
Mohan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Stef Coene
Sent: 17 September 2002 22:46
To: Robert Penz; [EMAIL PROTECTED]
Subject: Re: [LARTC] the range of HTB's prio
On Tuesday 17 September 2002 12:00, Robert Penz wrote:
> --
> Aren't you talking about the depth of the classes?
Euh stupid me. Indeed.
> Btw, several months ago I tried to hack my kernel (2.4.17 at that time)
> and changed the maxdepth to 7... Guess what happenned?
> It went OOOPS'ing... Anyway. That was HTB2.
In htb3 you can change it if you want :
htb
On Tuesday 17 September 2002 09:53, hanhbnetfilter wrote:
> HTB and imq was used to control traffic.
> AC="tc class add dev eth0 parent"
> $AC 1: classid 1:1 htb rate 100kbps burst 2k
> $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps
> burst 2k prio 1
> $AC 1:2 classid 1:11 htb rate 50kbps ceil
On Tuesday 17 September 2002 12:00, Robert Penz wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Tuesday 17 September 2002 11:50, Nickola Kolev wrote:
> > > please tell me the range of "prio"
> >
> > 1 to 8, 1 being the highest, 8 - the lowest.
>
> 0 is highest as I know ...
>
> but
HTB Prios are 0-6 by default (htb 3.6), but afaik u can increase this
number at compile-time.
btw: is it true that you're a "Spamware site or vendor"?
at least my Spam-Assasin (which consults 2 rbl-hosts...) declares you as
such...
> SPAM: Start SpamAssassin results
> ---
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 17 September 2002 11:50, Nickola Kolev wrote:
> > please tell me the range of "prio"
> 1 to 8, 1 being the highest, 8 - the lowest.
0 is highest as I know ...
but I've also an question:
is there if difference if I have 2 chains and use p
> HTB and imq was used to control traffic.
> AC="tc class add dev eth0 parent"
> $AC 1: classid 1:1 htb rate 100kbps burst 2k
> $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps
> burst 2k prio 1
> $AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps
> burst 2k prio 1
>
> please tell me the range of
HTB and imq was used to control traffic.
AC="tc class add dev eth0 parent"
$AC 1: classid 1:1 htb rate 100kbps burst 2k
$AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps
burst 2k prio 1
$AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps
burst 2k prio 1
please tell me the range of "prio"
__