: Thursday, May 31, 2007 2:36 PM
To: Mail List - Linux Advanced Routing and Traffic Control
Subject: Re: [LARTC] 2 NICs Bridge + Router
On 05/31/07 07:22, William Bohannan wrote:
Thanks Grant, I am very new to combining NATing and Brigdge. Please
can you possibly give an example on how to add
PROTECTED] On Behalf Of Grant Taylor
Sent: Thursday, May 31, 2007 2:36 PM
To: Mail List - Linux Advanced Routing and Traffic Control
Subject: Re: [LARTC] 2 NICs Bridge + Router
On 05/31/07 07:22, William Bohannan wrote:
Thanks Grant, I am very new to combining NATing and Brigdge. Please
can
On 06/04/07 11:28, William Bohannan wrote:
Works well except I cannot for the life of me get NAT working. I have
the following setup:
Good.
### Network Interface script
# /etc/init.d/network/interfaces
auto lo
iface lo inet loopback
auto br0
iface br0 inet static
address 193.xxx.xxx.77
Taylor
Sent: Monday, June 04, 2007 4:53 PM
To: Mail List - Linux Advanced Routing and Traffic Control
Subject: Re: [LARTC] 2 NICs Bridge + Router
On 06/04/07 11:28, William Bohannan wrote:
Works well except I cannot for the life of me get NAT working. I have
the following setup:
Good.
### Network
To: Mail List - Linux Advanced Routing and Traffic Control
Subject: Re: [LARTC] 2 NICs Bridge + Router
On 06/04/07 11:28, William Bohannan wrote:
Works well except I cannot for the life of me get NAT working. I have
the following setup:
Good.
### Network Interface script
# /etc/init.d/network
On 06/04/07 13:26, William Bohannan wrote:
Thank you so much been wanting to do this for ages, finally got it
working (had to remove the gw) :)
*nod*
I was in the middle of reading your last message when you replied
stating that you had fixed your problem.
I was just staring at the fact
-
Kind Regards
William Bohannan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Grant Taylor
Sent: Monday, May 28, 2007 6:39 PM
To: Mail List - Linux Advanced Routing and Traffic Control
Subject: Re: [LARTC] 2 NICs
On 05/31/07 07:22, William Bohannan wrote:
Thanks Grant, I am very new to combining NATing and Brigdge. Please
can you possibly give an example on how to add the virtual interface.
I'll try. I don't recognize the format of the file below, but I'll take
a stab at it.
Current
On 5/28/2007 8:12 AM, William Bohannan wrote:
Hi wondering if anyone can help. I have two NICs on a debian sarge based
system and current running as a bridge (br0) which consists of eth0 and
eth1. Is it possible to add a virtual interface to the eth1 so I can
also do NAT on the box as well?