> I think I caused unnecessary alarm. There was actually
> a network cable connecting my router and hub behind the linux
> box that does the shaping, duh :-) I forgot to pull it out once I
> move some servers around causing very little traffic to go through
> the box doing the shaping.
:)
> Thi
Hi Stef
I think I caused unnecessary alarm. There was actually
a network cable connecting my router and hub behind the linux
box that does the shaping, duh :-) I forgot to pull it out once I
move some servers around causing very little traffic to go through
the box doing the shaping.
On Mon,
does not HTB only shape on outgoing traffic? unless you start doing some
ingress queues?
- Original Message -
From: "Stef Coene" <[EMAIL PROTECTED]>
To: "Roché Compaan" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, July 29, 2002 5:54 AM
Su
> If I understand correctly I can shape incoming traffic by setting
> up a qdisc on eth0 and filters that match any of the ip addresses
> in my public subnet sitting behind the linux box that currently does
> the traffic shaping.
But all traffic coming on eth0 is leaving eht1 and vice versa. So s
> what kinda bridge are you using?
> bridge-nf? if you are it says it only supports iptables, you would have to
> mark the packets then use filter to put the marked packets into
> teh correct
> queue for managing
Yes I'm using bridge-nf, but as far as I understand bridge-nf
doesn't require ipta
To: "Stef Coene" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Sunday, July 28, 2002 10:27 PM
Subject: RE: [LARTC] Bridge with Traffic shaping
> On Saturday 27 July 2002 19:56, Roché Compaan wrote:
> > Hi,
> >
> > I am fairly new to routing and traffic cont
> On Saturday 27 July 2002 19:56, Roché Compaan wrote:
> > Hi,
> >
> > I am fairly new to routing and traffic control but I with the
> > help of the lartc howto I managed to setup a bridge with htb
> > traffic control. The traffic shapping does not seem to work
> > as I expected and I would real
On Saturday 27 July 2002 19:56, Roché Compaan wrote:
> Hi,
>
> I am fairly new to routing and traffic control but I with the
> help of the lartc howto I managed to setup a bridge with htb
> traffic control. The traffic shapping does not seem to work
> as I expected and I would really appreciate i
