Thanks everyone for the advice ,I have decided to use an old datataker
dt50 I have ,But am unsure how to use labview to monitor these sensor
readings, Does anybody have any advice or know were to get labview
drivers for this device , Any help appreciated.
Regards
Brett Scott
I have a PH probe /contoller with 4-20 ma output for input into a pc
for monitoring purposes , Now 4ma being 0 Ph and 20ma being 14 Ph ,
Can I simply wire this into to a comm port on my pc rs232 and then use
labview too monitor and perhaps control.Any help greatly appreciated.
Hello Joe , Thanks for the info , one more question, I have data
starting at maybe 0 , or maybe - 5, or maybe 5 , streaming in packets
and how can I make a true or false comparison in that when the load
cell is loading it will show true and when unloading show false
therefore changing the state of
Is this number special in any way , ie , the highest or lowest number
or unique in some way to the rest of the data ? If so,this should this
will be very easy to do.
James
Thank you for the help i managed to open it and see what you had done
, The shift register on the main while loop did the trick. Do you have
any suggestions for the blinking indicators?
Anyway Thanks again
Brett Scott
Western Australian School of Mines
Thanks , but unfortantly i only have poxy base package version 6 ,I'll
see if I can get someone to recompile in V6.The extract packets vi I
attached is a neat little vi wich returns an asci Packet.
Thanks for the help
Brett Scott
Russel could you please explin a little more ,I am relative self
taught newby,any help appreciated.
Kind Regards
Brett Scott
No , no , Patience is the factor here ,Plenty of creativity to go
around.
Back to the books and examples
Thanks
Brett Scott
I have written one that captures multiple channels of strain and
files,also displays on graphs , with selectable channels , Let me know
if you havnt found what your after yet ,
Brett
Ian
Thanks for that, didnt even know those property nodes existed. Works
great, BUT the number that controls the direction needs to works that
if the number is positive to the previous number it flashes down , and
if the displacment is negative to the last number it goes up(Blinks)
,not relative
I only use V6 , unfortuantly cant open , you must be using v6.1
,thanks for help anyway.see if I can talk someone into recompiling .
Thanks
I am recieving data (displacment) and wish to represent this as an
arrow blinking up or down depending on the number when the displacment
data is increasing the arrow blinks down and the opposite for negative
displacment ,Does anybody know a easy way to do this or even better a
example vi in V6 to
Thanks mads , surely there's got to be a easier way ,Perhaps there's a
vi around that I could wire up to the relevant paths and this could
give we a sort of ascending or descending streams numerics
Hi
I have been working with a vi witch connects to a serial port and
reads load and displacement, how can I simulate the type of data I
would normally be receiving , so that I can test everything
thoroughly, without actually connecting to the instrument at work.
There is a peak load detection and
Ah ha , This is exactly what I am trying to do , thanks for the help.
I want to improve my app by putting some visual indicators in the form
of 2 pictures , an arrow up and down , and would like these to blink
according do wich way the numbers are going positive or negative when
the data values on the displacment channel are changing ,Cant seem to
find any vi to hel
control to blink when a comparison of a peak load and the current
load, current is less than the peak & stop button blinks red .
I want to improve my application by putting a stop button control to
blink when a comparison of a peak load and the current load is made
,when current Load is less than
17 matches
Mail list logo
