ith a set power up state. If this is the case, you
can define what state your board powers up in. Refer to page 3-9 of
the PC-DIO-96 user manual linked below.
http://www.ni.com/pdf/manuals/320289c.pdf";>PC-DIO-96 User
Manual
Thanks for all your help. I'm Not that great with IO. It works just
like you said. So now all I have to do is create a task then write
zero's to it at the beginning of my program. then it should work
correctly right.
thanks
Joe
If you are reconfiguring your port in order to "read" the port, the
port will be truely reconfigured as read inputs with the default state
being pulled up.
If you use the same task ID that was generated from the "write" config
in the read port function, you will be able to readback the written
valu
I have A PC-DIO-96 card and my dilema is that when I write all outputs
low and then try to read them back The outputs read High. Why is that?