20.02.2013 0:40, Kostas Michalopoulos пишет:
Just got it, i noticed a small typo in the installer:
- The LCL is licensed LGPL with linking exception. This allows you to
create apps with any license you want, including comercial.
I think it should have been "commercial" (two m).
Fixed in r4035
Il 19/02/2013 16:41, Alexander Klenin ha scritto:
On Wed, Feb 20, 2013 at 1:50 AM, Graeme Geldenhuys
wrote:
I thought you guys might find this interesting...
Most interesting from my POV is the fact that they offer commercial support.
If someone can verify that their support is good, then it c
On 19 February 2013 21:38, Terry A. Haimann wrote:
> What steps do I need to do to get ZeosDBO installed on Lazarus, I have
> version 1.02 and haven't been able to get it to install. Has anyone
> considered having ZeosDBO in the Lazarus install files
> so that it isn't an issue?
>
> Terry
>
>
Yo
On 2013-02-19 21:38, Terry A. Haimann wrote:
> What steps do I need to do to get ZeosDBO installed on Lazarus,
I assume ZeosDBO is the same as Zeos DB Components? If so, the lazarus
packages are a mess in Zeos. I needed Zeos for a non-GUI application
without Zeos being installed in the IDE compone
What steps do I need to do to get ZeosDBO installed on Lazarus, I have
version 1.02 and haven't been able to get it to install. Has anyone
considered having ZeosDBO in the Lazarus install files
so that it isn't an issue?
Terry
--
___
Lazarus mailing l
Just got it, i noticed a small typo in the installer:
- The LCL is licensed LGPL with linking exception. This allows you to
create apps with any license you want, including comercial.
I think it should have been "commercial" (two m).
On Thu, Feb 7, 2013 at 4:09 PM, Martin wrote:
> On 07/02/20
El 19/02/2013 0:52, silvioprog escribió:
Hello,
Can I write values in some cells but keeping the existents formulas?
Demo for explain my doubt in attached.
Hello,
AFAIK no as the spreadsheet is fully loaded and interpreted (non
interpreted information is discarded) and then saved.
--
-
On 19/02/2013 18:44, Zaher Dirkey wrote:
In SynHighlighterHashEntries at line 101
Clear method in FreePascal is virtual, do we need to check
LIST_CLEAR_NOT_VIRTUAL?
How long has it been virtual in the fpc base class?
--
___
Lazarus mailing list
Laz
In SynHighlighterHashEntries at line 101
Clear method in FreePascal is virtual, do we need to check
LIST_CLEAR_NOT_VIRTUAL?
Best Regards
Zaher Dirkey
--
___
Lazarus mailing list
Lazarus@lists.lazarus.freepascal.org
http://lists.lazarus.freepascal.org/mai
Antonio Fortuny schrieb:
Hi folks.
Do you know an event or any other trick I could use when a form re-gains
control, i.e. is focused again ?
Events OnShow, OnActivate fire only once after OnCreate.
These were my candiates as well.
The form is brought to the foreground by the means of a
MyF
It depends on what you want to do with Form1 while Form2 is showing. You
can put a line in Form2's OnActivate event to bring Form1 to the front but
you will not be able to do anything in Form1 until Form2 is closed.
Cheers.
Bob
On Tue, Feb 19, 2013 at 9:43 AM, Antonio Fortuny
wrote:
> Hi folks.
On Wed, Feb 20, 2013 at 1:50 AM, Graeme Geldenhuys
wrote:
> I thought you guys might find this interesting...
Most interesting from my POV is the fact that they offer commercial support.
If someone can verify that their support is good, then it can be
mentioned on the Lazarus site.
--
Alexander
I thought you guys might find this interesting...
Quoted from [http://ibexpert.net/ibe/index.php?n=Main.News] but there is
more juice information online.
>From the latest IBExpert newsletter: 18th February 2013
--
"Are you still using Interbase? Perhaps you should think abou
Hi folks.
Do you know an event or any other trick I could use when a form re-gains
control, i.e. is focused again ?
Events OnShow, OnActivate fire only once after OnCreate.
The form is brought to the foreground by the means of a
MyForm.BringToFront once a OtherForm.ShowModal returns. The reaso
On 19 February 2013 11:31, Mattias Gaertner wrote:
Thanks Mattias, Chavoux, Martin and Sven.
I have learnt from your advice.
Following Sven's instructions on how to add LazUtils helped for my first
problem.
Obviously I do not know about Lazarus itself and will have to work through
some tuto
Hi Chavoux,
the feature you are asking for is already there.
Goto "View"--> "IDE Internals"
Then choose "About IDE" or "About FPC".
Regards, Sam
Von: Chavoux Luyt
An: Lazarus mailing list
Gesendet: 10:22 Dienstag, 19.Februar 2013
Betreff: Re: [Lazarus] P
Thanks Mattias & Sven!
On 19 February 2013 11:43, Mattias Gaertner wrote:
>
See here:
> http://wiki.freepascal.org/Qt_Interface#Quick_start_guide_for_Linux
>
>
>
http://wiki.freepascal.org/LCL_Internals
>
>
Sven Barth pascaldra...@googlemail.com via lists.lazarus.freepascal.org:
If you want to
On Tue, 19 Feb 2013 11:22:21 +0200
Chavoux Luyt wrote:
> Hi Mattias
>
> On 19 February 2013 11:12, Mattias Gaertner wrote:
>
> >
> > On some Linux the QT version is faster. Unfortunately there is no
> > debian package for that. But compiling it is easy.
> >
> Is there anywhere where it is expl
On Tue, 19 Feb 2013 11:09:14 +0200
Chavoux Luyt wrote:
> Hi Johann
>
> I have had similar issues in the past. I would really be nice if (like
> Delphi) there was a setting in the Tools/Options window where you could set
> (or at least see) the paths to all the units used by Lazarus
This shows t
On 19.02.2013 10:22, Chavoux Luyt wrote:
Hi Mattias
On 19 February 2013 11:12, Mattias Gaertner mailto:nc-gaert...@netcologne.de>> wrote:
On some Linux the QT version is faster. Unfortunately there is no
debian package for that. But compiling it is easy.
Is there anywhere where it
Hi Mattias
On 19 February 2013 11:12, Mattias Gaertner wrote:
>
> On some Linux the QT version is faster. Unfortunately there is no
> debian package for that. But compiling it is easy.
>
Is there anywhere where it is explained how this was done? The original
Delphi language was pretty much a Pas
On 19.02.2013 09:17, Johann Spies wrote:
My endeavour to return to Pascal is getting to the point of frustration:
1. Although I found that sometimes I have to tell Lazarus to scan the
fpcsource to be able to find installed units, it still happens that from
time to time I cannot compile somethin
On Tue, 19 Feb 2013 10:17:59 +0200
Johann Spies wrote:
> My endeavour to return to Pascal is getting to the point of frustration:
>
> 1. Although I found that sometimes I have to tell Lazarus to scan the
> fpcsource to be able to find installed units, it still happens that from
> time to time I
Hi Johann
I have had similar issues in the past. I would really be nice if (like
Delphi) there was a setting in the Tools/Options window where you could set
(or at least see) the paths to all the units used by Lazarus as well as a
separate setting for the paths to all the units used by the current
On Tue, 19 Feb 2013 18:54:53 +1100
Александр С. wrote:
> >You have to know the units where the class declarations reside
>
> Here is an example LFM-file:
>
> object Form1: TForm1
> Left = 224
> Height = 240
> Top = 146
> Width = 320
> Caption = 'Form1'
> ClientHeight = 240
> Clien
On Tuesday 19 February 2013 09:17:59 Johann Spies wrote:
> My endeavour to return to Pascal is getting to the point of frustration:
>
BTW there is another IDE with integrated debugging for FPC available which
maybe can fulfill your needs.
Martin
--
___
My endeavour to return to Pascal is getting to the point of frustration:
1. Although I found that sometimes I have to tell Lazarus to scan the
fpcsource to be able to find installed units, it still happens that from
time to time I cannot compile something because a unit cannot be found.
Today it
Eric Kom wrote:
$ svn co http://svn.freepascal.org/svn/fpc/trunk fpc
# aptitude install fpc
$ export PP=/usr/bin/ppc386
$ make OVERRIDEVERSIONCHECK=1 NOGDB=1 OPT='-O- -gl -Xs-' all
Where is the "make install" command?
sorry but. I used the make install command after.
Also make sure that the
28 matches
Mail list logo
