No configuration program, just get the correct modules loaded and away it
went.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jeff
Newmiller
Sent: Fri, 14 Sep 2001 12:15
To: Andrew GRAY
Cc: [EMAIL PROTECTED]
Subject: Re: [Leaf-user] Drivers for the DLin
On Fri, 14 Sep 2001, Andrew GRAY wrote:
> Thankyou to all who replied. I have upgraded the kernel to 2.2.19-1 and
> installed the modules on my test machine and all appears to be working for
> now. We will see how it is going on monday and upgrade the production
> machine if all is still well
Thankyou to all who replied. I have upgraded the kernel to 2.2.19-1 and
installed the modules on my test machine and all appears to be working for
now. We will see how it is going on monday and upgrade the production
machine if all is still well then.
Andrew GRAY
System Administrator / Senior
No disk image, but using this config I am connected to a Cisco 3015. (just
set it up about an hour ago.)
ipsec.conf
# VPN Between TSPHouse and BWI Office
conn LAN1-LAN2
# How persistent to be in (re)keying negotiations (0 means very).
keyingtries=0
authby=secret
#
Hi Etienne
I didn't saw any insmod commands in your scripts. Do you load the kernel
module "cipcb.o" somewhere?
if not loaded, tunnel won't run.
greetings
Sandro Minola
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Etienne
Charlier
Sent: Wednesday, S
Title: Re: [Leaf-user] Drivers for the DLink DFE 530TX
Andrew,
> Does anyone have a set of compiled drivers for the DFE 530TXwhich work with
> the Eigerstein LRP? I have the LRP running using a couple of RTL 10 MHz
> (NE2000 Clone) cards but am trying to upgrade the network to 100MHz. We
