On Thu, 10 Jul 2003, Hein Bauer wrote:
Dear list,
the package ntpdate does not work correctly here.
The time is 2 hours minus actual time. ntpdate does
connect to its given time-server (ntps2-2.wismar.de),
but results in an incorrect time.
I think my Beringbox has a wrong timezone
On Wed, 9 Jul 2003, Scott wrote:
I trying to get Bearing 1.2 to boot off of an 300MB IDE disk.
That's Bering, not Bearing.
ide-mod.o, ide-disk.o and ide-probe-mod.o are installed to /boot/lib/modules
are are uncommented in modules
You mean uncommented in /boot/etc/modules? Not /etc/modules?
On Thu, 10 Jul 2003, Tom Diehl wrote:
On Thu, 10 Jul 2003, Hein Bauer wrote:
Dear list,
the package ntpdate does not work correctly here.
The time is 2 hours minus actual time. ntpdate does
connect to its given time-server (ntps2-2.wismar.de),
but results in an incorrect time.
Hein Bauer wrote:
I think my Beringbox has a wrong timezone defined...
I have to quote myself :-(. Setting the time zone is part
of setting the system settings in lrcfg
It should also be part of configuring ntpdate.lrp as well.
Jaques Nilo, what do you think about ? ;-)
So long !
Scott wrote:
It seems your floppy is corrupt. Use another one.
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
---
This SF.Net
Hello Hein
As you can read from other messages in this thread. you have to distinguish
between two causes
1. ntpdate doesn't work at all.
-- in that case the most probable cause is that you didn't set the
shorewall rules as in the butime document
2. ntpdate works, but your localtime on the
On 10 Jul 2003, Charles Holbrook wrote:
/var/lib/lrpkg/netsnmpd.list
etc/init.d/snmpd
etc/snmp/snmpd.conf
usr/lib/libsnmp*
usr/lib/libucd*
usr/sbin/snmpd
var/lib/lrpkg/netsnmpd.*
var/ucd-snmp/snmpd.conf
I don't think that is my problem. Unless it's somewhere else in the lrp
that is
