I have just install 2.4 released and i have the same problem
I run it on a Soekris net4801-50.
Here's the packages I use
lrp="root config etc local modules iptables keyboard shorwall ulogd dropbear
dnsmasq mhttpd webconf mawk libm lpthread ipsec ntpdate"
Thanks
Huy
- Original Message -
Sorry, forgot to say i did not change anything in dnsmasq apart from this
line
dhcp-range=192.168.100.100,192.168.100.199,12h
There's nothing in the logs that i can see. Unfortunately i only notice the
problem if the pcs on my network stop getting dns result or dhcp lease
There's doesnot seem to
Hi
I am setting up a Bering uClibc 2.4 Release ipsec VPN with a old Bering 2.0
at one of our hosting center. Although the tunnel working perfectly when
ever i type in any ipsec command such as ipsec eroute, ipsec manual con_name
up, ipsec help ect. It alway faill with the following
/usr/sbin/i
I’m running Bering u-Clibc 2.1.3
I have 5 static IP’s coming in from my ISP. (eth 0)
4 of them are proxyARPed to the DMZ. (eth 2)
The last IP is serving my local network. (eth 1)
My dmz is basically web servers with port 80 open.
Outside my network, people can see my servers just fine, but from my
Hello Huy,
Can you post the problem to the dnsmasq list? I'm not able to reproduce this
behaviour, it's running stable on my router for more than a week. I hope
someone on the dnsmasq list can provide some things to test/check in your
dnsmasq setup.
Eric
-Original Message-
From: "Huy
Hello Huy,
There is indeed a typo in the buildtool setup of openswan, I have
corrected the setup and created a new package. It seems that Sourceforge's
CVS is down at the moment so I can't commit the fix. I will send you a new
package privately.
Thanks for reporting.
Eric
> Hi
> I am setting up
