Hi,
I've just updated my ap (running on wrap), to 2.4.1 (was running 2.4
beta), and now I'm starting to get "i8253 count too high! resetting.."
when I do a reset (pull power),
I know that the newer boards from pcengines doesn't have this problem,
but also setting "reboot=bios" is supposed to work
Hello Casper,
> Hi,
>
>
> I've just updated my ap (running on wrap), to 2.4.1 (was running 2.4
> beta), and now I'm starting to get "i8253 count too high! resetting.." when
> I do a reset (pull power),
>
>
> I know that the newer boards from pcengines doesn't have this problem,
> but also setting
Cant get a DWL520 rev E device to work in LRP. I have the following
modules loaded, hostap.o and hostap_pci.o and packages hostapu.lrp and
wireless.lrp. The device appears in ip addr and the interface pings from
the LRP box but cant get the radio to pass data.
bering 2.4
debug
Apr 29 20:59
Cant get a DWL520 rev E device to work in LRP. I have the following
modules loaded, hostap.o and hostap_pci.o and packages hostapu.lrp and
wireless.lrp. The device appears in ip addr and the interface pings from
the LRP box but cant get the radio to pass data.
bering 2.4
debug
Apr 29 20:59
Hello Jim,
Looking at the output below it seems to me that the firmware isn't
properly loaded. With the lines
fw_primary /etc/firmware/hostap/pm010102.hex
fw_secondary /etc/firmware/hostap/rf010800.hex
in the interfaces file you should see a message:
"Downloading primary firmware pm010102.hex to i
Things seem to point to the cards as running only primary firmware. Whats
the next step?
firewall# hostap_diag wlan0
Host AP driver diagnostics information for 'wlan0'
NICID: id=0x8024 v1.0.0 (PRISM III Mini-PCI (AT24C08 compatible small serial
flash))
PRIID: id=0x0015 v1.1.2
ioctl[PRISM2_IO