run ntpdate from the command line.
imagerocfw# ntpdate -u timelord.uregina.ca
1 Dec 20:02:19 ntpdate[30561]: adjust time server 142.3.100.15 offset
-0.069286 sec
Which seems to work.
Am I missing something?
Darcy Parker
---
This SF.net
Good day all,
I am considering replacing a bunch of old dual floppy machines with
the microtik routerboard 500 (http://www.routerboard.com/). These
boards have a CF card slot and can be configured to boot off of them. I
believe the units has a MIPS 79RC32434 processor.
I am currently
Good day all,
I had a similar problem with Leaf bering 1.1 and 1.2. I have since
upgraded to uClibC 2.2.2. I did find a fix for the older system when I
was using it, I replaced PUMP with DHCPD which solved the problem.
Darcy Parker
Message: 2
Date: Sun, 06 Mar 2005 21:41:17 -0500
From
Good day all,
Our network at work has MS Remote Access Server (RAS) running and I connect
to the network using MS VPN connection from my WinXP box at Home. I am
going through a Bering uClibC 2.0 LRP box and this works no problem.
However, I can only make a single connection to the VPN.
Hi Andrew, If you can send me your log file I can have a look to see what
is being reported. Some of these may be harmless DNS or traceroute queries
that can be dropped from logging.
Darcy Parker ([EMAIL PROTECTED])
Message: 4
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Fri, 16 Jul 2004 17
Good day all,
As in my previous posts, I have been having trouble with weblet displaying
the log files. Charles Steinkuehler has pointed me in the right direction
and I hope someone with more experience with uClibc may be able to help me
close this off.
The problem was
Network setup - OK
Firewall rules - OK
Systems Details OK (I think)
Any Ideas on how I can fix this?
Darcy Parker
---
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X
Good day All,
I have gone to the website and created the patch file as per the
directions below. How do I apply this patch? (Excuse me for being new to
Linux but you have to start somewhere).
Message: 6
Date: Tue, 28 Oct 2003 07:54:00 -0600
From: Charles Steinkuehler [EMAIL PROTECTED]
To:
the rules, backup shorewall and restart shore, I loose all
external connectivity.
Have I done something wrong here? Anyone else successfully set up XBOX?
Best regards,
Darcy Parker
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek
([EMAIL PROTECTED]) and I will post a message on the list when I have the
page up.
Darcy Parker
---
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux
init_module:netsemi:operation not supported by device
tulipinit_module:tulip:operation not supported by device
Does this mean the only driver I need is 3c59x? Am I missing something else
here?
Best Regards,
Darcy Parker
---
This SF.net email
to the
TightVNC server on loc. Can this be accomplished using port forwarding ?
I would normally type http://xxx.xxx.xxx.xxx:5800 in a web browser to
connect to the TightVNC server. Would I specify port 22 here instead of
port 5800?
Any help is appreciated.
Best Regards,
Darcy Parker
Message: 1
Date: Wed, 11 Jun 2003 23:26:16 +0200
From: Patrick Benson [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [leaf-user] Shorewall Rules and TightVNC
Darcy Parker wrote:
Good day all,
I am using Leaf Bering (latest ver) and currently have my shorewall
rules
Good day all,
I am using Leaf Bering (latest ver) and currently have my shorewall
rules to allow a TightVNC connection only from a fixed IP address at work.
# DNAT to allow TightVNC from Work Only
#
DNATnet:xxx.xxx.xxx.xxx192.168.1.100:5800tcphttp
DNATnet:xxx.xxx.xxx.xxx
I just know that people out there will be laughing! My root password no
longer works. I am running leaf bering. Is there anyway to restore or
change it?
Darcy Parker
---
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting
Never Mind - Bad keyboard
Darcy
- Original Message -
From: Darcy Parker [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, April 03, 2003 9:55 PM
Subject: lost root password
I just know that people out there will be laughing! My root password no
longer works. I am running leaf
,norfc1918
loceth1detectroutestopped
How do I get pump to automaticly renew my lease?
Best Regards,
Darcy Parker
---
This SF.net email is sponsored by:
The Definitive IT and Networking Event. Be There!
NetWorld+Interop Las Vegas 2003
17 matches
Mail list logo