All,
Can I use the pkgpath.cfg and lrpkg.cfg files on Dachstein LRP that is
booting of an IDE hard drive? It is booting in a DOS partition and runs in
RAM
Thanks in advance for any help
Peter
___
Leaf-user mailing list
[EMAIL PROTECTED]
Can I use the pkgpath.cfg and lrpkg.cfg files on Dachstein LRP that is
booting of an IDE hard drive? It is booting in a DOS partition and runs in
RAM
Yes. The /linuxrc script will look for the pkgpath.cfg and lrpkg.cfg files
on your boot= device (probably your HDD).
Charles Steinkuehler
-
From: Charles Steinkuehler [EMAIL PROTECTED]
To: Peter Kanatselis [EMAIL PROTECTED];
[EMAIL PROTECTED]
Sent: Friday, March 08, 2002 11:21 AM
Subject: Re: [Leaf-user] Dachstein LRP
Can I use the pkgpath.cfg and lrpkg.cfg files on Dachstein LRP that is
booting of an IDE hard drive? It is booting
Thanks Charles, I tried it but it failed. What if anything remains in the
syslinux.cfg file? Do you include the LRP= and PKGPATH= in the new
file?
Do you leave them blank in the old one?
You might want to see the CD-ROM readme file...it goes over the use of these
settings in a bit more
Greetings all!
I'm trying to set up LRP using the dachstein image on a 486 with a serial
port modem and diald. I have almost everything configured and apparently
working except the modem. I try to communicate with it through /dev/ttyS0
(it is COM1), but all that I get is the following error:
I am trying to make the Dachstein LRP to work as a firewall at home.
The problem is that it does not use my ISP gateway, i.e. I am not
possiblet
o reach anything beyond the gateway.
However, if I use the Eigerstein Static LRP, which have the same setup it
works fine.
Netstat shows 3 entry