Hello all
I hope I am writing at the correct email address.
I installed Bering-uClibc 3.1 on an IDE Harddisk. Just at the beginning I have
some problems. I didn't installed shorewall or itables. The first Thing after
the first boot of Bering, I just installed the modules for my network cards.
Ray & Charles,
Thanks for the direction. I will take a gander back thru the configs, and
probably start over with a clean floppy if it doesn't jump out at me. Likely I
nicked the code somewhere when I was changing the 192.168.1 references.
It'll be another learning experience :)
Dan
Quotin
I've not seen that particular error from sendto: before, but Charles'
suggestions are probably the right place to start (even though routing
problems normally generate a different ping error).
One thing, though: if your hosts are numbered 209.98.58.241, 209.98.58.244,
and 209.98.58.246, then they
> I have two DachCD systems setup to begin testing IPSec. Both are assigned
> external IPs in my 209.98.58.0/29 range, plugged into a hub that allows
them to
> share the outbound router. The first system, .244, can ping .246 with no
> problem, and it can ping the router at .241. The system at .
I have two DachCD systems setup to begin testing IPSec. Both are assigned
external IPs in my 209.98.58.0/29 range, plugged into a hub that allows them to
share the outbound router. The first system, .244, can ping .246 with no
problem, and it can ping the router at .241. The system at .246 c
