dress filtering but "let's try to walk
before run"
Thanks in advance
Etienne
- Original Message -
From: "Etienne Charlier" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, April 05, 2002 8:49 PM
Subject: Re: [Leaf-user] bering1.0rc1 & prism2
Le Vendredi 5 Avril 2002 21:25, Marian Radulescu a écrit :
> Jacques Nilo wrote:
> >Now
> >ifdown -v br0
> >ifup -v br0
> >and you should see what is going on ...
> >Jacques
>>In bridge if-post-down script one of the last thigs that this script is
> doing is to shutdown the interfaces used for th
Jacques Nilo wrote:
>
>Now
>ifdown -v br0
>ifup -v br0
>and you should see what is going on ...
>Jacques
>
In bridge if-post-down script one of the last thigs that this script is
doing is to shutdown the interfaces used for the bridge. The only thing
is that this script is using ifconfig for t
ues Nilo" <[EMAIL PROTECTED]>
To: "Marian Radulescu" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Friday, April 05, 2002 7:28 PM
Subject: Re: [Leaf-user] bering1.0rc1 & prism2 pci card
> > >Marian Radulescu wrote:
> > >
> > >As menti
> >Marian Radulescu wrote:
> >
> >As mentionned in the doc, bridging has not been really tested. So let's
> >try it.
> >What says:
> >ifup -v br0
> >How looks the bridge part of your /etc/network/interfaces file ?
> >
> # ifup -v br0
> ifup: interface br0 alerady configured
OK I should have asked
Jacques Nilo wrote:
>Marian Radulescu wrote:
>
>As mentionned in the doc, bridging has not been really tested. So let's
>try it.
>What says:
>ifup -v br0
>How looks the bridge part of your /etc/network/interfaces file ?
>
# ifup -v br0
ifup: interface br0 alerady configured
# brctl show doesn't
Hi Jacques,
Ok. I issuedd this commands on the second router:
brctl addbr br0
brctl addif br0 wlan0
brctl addif br0 eth0
#for some reasons wlan0 has noop !
ip link set wlan0 up
# now the ap is reporting that this interface is connected
ip addr add 192.168.1.1 dev br0
ip link set br0 up
In this m
Marian Radulescu wrote:
> I'm using Bering as a base distro. I compiled and added
> prism2hostap_pci.o which is a patched version of Jouni Malinen
> Prism2x-HostAP-2002-02-13 [http://people.ssh.com/jkm/Prism2/] using pci
> patch Prism2x-HostAP-2002-03-08 from
> https://www.wavehan.de/projekte/pri
Marian Radulescu wrote:
>
> and the second box which i wanted to act as a bridge (no firewall, no
> nat...)
>
> wlan1 - [link with ap wlan0] [prism2]
> eth1 - [hub] - [other network] [eexpress]
>
> I tryied without success to setup a bridge on the second lrp system with
> Bering and us
Helo all,
I want to setup a mixed wired/wireless lan using Bering 1.0rc1 with
Shorewall. 1st box is having 4 interfaces:
Internet eth0 1.2.3.4 - [isp]
DMZ eth1 192.168.1.254 -[hub]- 192.168.1.0/24
Local eth2 192.168.2.254 -[hub]- 192.168.2.0/24
WLan wlan0 192.168.3.2
10 matches
Mail list logo