Hi Sven
Am 26.11.2016 um 23:44 schrieb Sven Kirmess:
...
Now it makes sense.
firewall# which shorewall
/sbin/shorewall
# /etc/init.d/shorewall start
does mount the modules, but
# shorewall start
does not. I did try "shorewall start", but by saving and rebooting the
system was using "/etc/init
On Sat, Nov 26, 2016 at 10:15 PM, Erich Titl wrote:
> Yes and I am puzzled myself, why should saving the config change anything?
> The start/stop script should be the same.
>
> About restart, yes this has not been done, but then I never use restart,
> would not know why on a freshly installed sys
Hi Sven
Am 26.11.2016 um 21:42 schrieb Sven Kirmess:
The same problem exists with shorewall6!
shorewall6 cannot be started on a freshly installed Bering-uClibc 6.0.0!
You have to
mount_modules
shorewall6 restart
umount_modules
Saving the config and rebooting solves the problem but this is a v
The same problem exists with shorewall6!
shorewall6 cannot be started on a freshly installed Bering-uClibc 6.0.0!
You have to
mount_modules
shorewall6 restart
umount_modules
Saving the config and rebooting solves the problem but this is a very
confusing bug.
On Sat, Nov 26, 2016 at 12:20 AM, Sv
On Thu, Nov 24, 2016 at 4:51 PM, kp kirchdoerfer <
kap...@users.sourceforge.net> wrote:
> I started a pristine 6.0.0 x86_64 iso image and set clampmss to "yes"
>
> shorewall restart gave the error you see.
>
> /etc/init.d/shorewall stop
>
> /etc/init.d/shorewall start
>
> loads the module in quest
Am Mittwoch, 23. November 2016, 22:59:37 schrieb Sven Kirmess:
> As Erich pointed out, it seems to not load the module during boot. (That's
> again on a fresh system without a configdb.lrp)
>
> firewall# shorewall show capabilities | grep -i tcpmss
>TCPMSS Match (TCPMSS_MATCH): Not available
>
Hi Sven
Am 23.11.201ve yo6 um 22:59 schrieb Sven Kirmess:
As Erich pointed out, it seems to not load the module during boot. (That's
again on a fresh system without a configdb.lrp)
firewall# shorewall show capabilities | grep -i tcpmss
TCPMSS Match (TCPMSS_MATCH): Not available
TCPMSS Tar
As Erich pointed out, it seems to not load the module during boot. (That's
again on a fresh system without a configdb.lrp)
firewall# shorewall show capabilities | grep -i tcpmss
TCPMSS Match (TCPMSS_MATCH): Not available
TCPMSS Target (TCPMSS_TARGET): Not available
firewall# mount_modules
fi
I'm using the x86 image but because Bob reported the i686 to work I've
downloaded Bering-uClibc_6.0.0_i686_syslinux_serial115200.tar.gz and
installed it on a fresh flash drive. Booted it up with the pristine config
and the only thing I've changed is to set CLAMPMSS=Yes.
Must be something obvious..
Hi Sven;
Am Dienstag, 22. November 2016, 21:43:48 schrieb Sven Kirmess:
> I get this error message when I try to enable CLAMPMSS=Yes. This worked
> with LEAF Bering-uClibc 5.2.5 but doesn't work with LEAF Bering-uClibc
> 6.0.0.
>
> Was something in the kernel changed or did I do something wrong w
I'm using i686 syslinux, and I just tried this and did not get that error.
I'm unsure that my upgrade technique was the best way to go but it was
pretty simple and it worked. I've run into a few small things but so
far so good!
- Bob
-
I get this error message when I try to enable CLAMPMSS=Yes. This worked
with LEAF Bering-uClibc 5.2.5 but doesn't work with LEAF Bering-uClibc
6.0.0.
Was something in the kernel changed or did I do something wrong with the
migration?
12 matches
Mail list logo
